[argyllcms] Re: Compatibility with i1 (Eye One) Display Pro 3 retail and OEM?
- From: János, Tóth F. <janos666@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Tue, 21 Feb 2012 18:20:13 +0100
What is the valid range for the target integration time parameter?
0.1-4.0 comes to my mind from somewhere (may be CalMan?) but I could
not find a word about this in the ArgyllCMS documentation.
2012/2/20 Graeme Gill <graeme@xxxxxxxxxxxxx>:
> Kristian Jörg wrote:
>> If needed I can assist with the mentioned debug settings on the i1d3 with
>> Argyll to help find a
>> method to read plasmas for Argyll profiling.
>
> The example readings with the tweaked code didn't seem too bad. There was the
> occasional
> anomalous one of a about 1 - 2.5 delta E disparity from the majority. My only
> thought
> is to use the -l switch to change the target integration time from 0.2 seconds
> default to (say) 0.4 seconds for the "CRT" setting, which may reduce the
> magnitude of the anomalous readings.
>
> Graeme Gill.
>
Other related posts:
