In message <49493.109.176.244.32.1338838929.squirrel@xxxxxxxxxxxxxxxxx co.uk> david.rooke@xxxxxxxxxxxxxxxxxxxxx wrote: > Tried Alan's Restore516 after placing it on the hard-drive (root > directory). Screen message indicated a successful restore and told me to > re-boot which I did. I now have a screenful of vertical black, purple, red > and green bands with a broad black horizontal band across the top and the > bottom of the screen, both approximately one sixth of the screen height. > When I try re-booting I get as far as the "clunk" (which I think I > remember as being the floppy drive) after about 2 seconds but no beep. > There is a screen message saying "signal frequency is out of range. H: > 41.7KHz V: 79.4KHz. Please change signal timing." I have an Ilyami > Prolite E431S monitor from Castle. It has a Menu button on the front as > well as contrast and brightness buttons but does not respond to any of > these. I am now beyond my range of competence! > Sending this from the Mac. Well I just wonder if the other person had a different videocard or cards in a different position as this is built on the fly with any ROM hence why you do a transfer ROM when you move or replace a videocard. I'm not sure how you get out of that without a return to Castle unless you can type things in blind but if you are not getting to the bleep then RISC OS may not even be booting fully. -- See and experience the future using ARM Technology - BeagleBoard -xM, Cortex A8 and RISC OS 5.19. --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx