[iyonix-support] Help with 5.18 error
- From: David Rooke <david.rooke@xxxxxxxxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Mon, 04 Jun 2012 14:12:46 +0100
Hi All
I would be grateful for some advice concerning the following, please.
I think I have inadvertently messed up my upgrade from 5.16 to 5.18. I had
been using the softload version of 5.18 for some time without any problem and
decided to re-flash the ROM to install 5.18 permanently (using
Tungsten-518Flash). However I forgot to ensure the softload 5.18 was not in
use when I re-flashed with the consequence that !Restore516 was not created as
it would normally have been - !Restore518 was. I am assuming that, if I use
this !Restore518, it will be the softload version of 5.18 which is then
re-flashed. I have a concern that that might not be a good thing to do.
The reason for my query is that, since upgrading to 5.18 by re-flashing, !FTP
is failing to connect to my MacBook via my wireless modem, whereas it was
connecting when I used 5.16 and the softloaded 5.18.
I can find nothing wrong with any of the settings on Mac or Iyonix and
'pinging' Mac from Iyonix suffers no packet loss, so I want to go back to 5.16
and check things from there. I don't think it is a module problem. There were
no unplugged modules in soft 5.18 and none after re-flashing, although there
were a few extra modules installed.
Is it possible to re-flash the ROM with 5.16 (using Tungsten-516Flash)? Are
there likely to be any problems in doing so?
Thanks for any help.
--
David Rooke
-----------
david.rooke@xxxxxxxxxxxxxxxxxxxxx
Nottingham, UK
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx
Other related posts:
