> On 04/06/2012 20:42, david.rooke@xxxxxxxxxxxxxxxxxxxxx wrote: >> >> [SNIP] >> >> When I try re-booting I get as far as the "clunk" (which I think I >> remember as being the floppy drive) after about 2 seconds but no beep. >> There is a screen message saying "signal frequency is out of range. H: >> 41.7KHz V: 79.4KHz. Please change signal timing." > > Have you tried plugging your keyboard in to the rear USB socket and > powering up with delete pressed to reset the CMOS. If the monitor still > gives an out of range try powering up with 4 pressed on the numeric key > pad to select a VGA startup mode. > > Cheers > ---David > No I hadn't tried those. Have now. Same screen message as before. Am I right that the absence of a Beep following the Floppy-access clunking, when trying to Boo up, means the Iyonix is not booting up properly? -- David Rooke --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx