While reading those discussions keep in mind that I am a reckless maverick and will encounter more learning experiences than you are likely to encounter. Partitioning and Dual-booting are really pretty simple. Here's a basic guide: 1. Back up all data, downloads, files, settings etc that you don't want to lose. Save to a drive or storage device that can be removed from the computer to be worked on. 2. Install the oldest Operating system first. (98, 98SE, ME, XP, Vista, Win 7 in order of oldest to newest) During this install you will have the opportunity create or delete partitions. Have a plan as to what you want and then create them during this first installation. You will also have the opportunity to format the partition you will be installing to. Chose the Quick Format only if you have recently done a scandisk and repair on the drive. The Quick format does not do a scan for errors. 3. Install the next oldest OS. When offered the chance, you may change any partitions *except* the one you just installed the older OS on. Format the partition, but again, do not use the Quick Format unless you want to skip the disk scan. During the installation process, the system will reboot. Do *not* tell it to boot from the install CD. This will happen with all installs of all Windows operating systems (except DOS and Windows before Win95). If you are starting with an OS RECOVERY disk instead of an installation disk, then you will not get the option to create or format any partitions. After the recovery process is done boot to Vista and use the built in disk manager to resize the Vista partition to a smaller size and then create the partition for the next OS. Or you can install and use any reputable partition management software to do the job. Be aware that Vista may not give up more than about half of the drive for other partitions. Don tempting2taanzaa wrote: > Sorry I am just getting back to you. Work is always a detriment for me when > trying to do anything I consider to be enjoyable (???). I will be looking > closely at your discussions with Don, and I have saved the tutorial Don sent > me and as soon as I get the time to get started on this project, I will > submit any questions. However, I will save discussions between you and Don > as a reference point. > > --------------------------------------------------------------- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To subscribe, unsubscribe or modify your email settings: //www.freelists.org/webpage/pctechtalk OR To subscribe to the mailing list, send an email to pctechtalk-request@xxxxxxxxxxxxx with "subscribe" in the Subject. To unsubscribe send email to pctechtalk-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject. To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/ To contact only the PCTT Mod Squad, write to: pctechtalk-moderators@xxxxxxxxxxxxx To join our separate PCTableTalk off-topic group, send a blank email to: pctabletalk+subscribe@xxxxxxxxxxxxxxxx ---------------------------------------------------------------