You're probably going to tell some story about "Charles Moncky"... I thought that an adjustable open end wrench was commonly called a "shifter" across the pond. I believe that a "spanner" is a fixed jaw open end wrench. > -----Original Message----- > From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng- > bounce@xxxxxxxxxxxxx] On Behalf Of Jesse > Sent: Monday, September 24, 2012 4:09 PM > To: modeleng@xxxxxxxxxxxxx > Subject: [modeleng] Re: Parts prices > > Barry, > That I can understand as I have a turret (capstan) where my tailstock normally > goes, but I do a lot of work that requires the turret which has > 6 stations so the tailstock sits on the floor. Currently, the box tool, a threading > die and a couple of drill chucks are mounted on the turret. > Sometimes there is also a center cut end mill to allow facing of the work and a > center drill in another chuck. > Funny how two nations with the same language call items by different terms. A > few years ago I had a problem with "linisher" which is belt sander over here. > Ah well, we will soon be building weapons to slow down the Taliban and I > suppose I will have to make some sort of spear thrower or something. > Several years ago I had one of our loggers ask me where the "chuck" for the > drill press was. I pointed out to him that it was in plain sight on the drill press, > but he still couldn't see it. It turned out that he called the chuck key a "chuck" > and it had fallen to the floor where he didn't see it. Loggers is big tough blokes, > but sometimes have funny names for tools. Over here every adjustable open > end spanner (wrench) is called a "Crescent wrench", I suppose because the first > ones were made by Crescent Tool Company. Spanners are usually forked tools > (Y > shaped) with pins that fit into notches or holes on steam packing glands and the > like. Little delicate adjustable spanners are used to unscrew the back of wrist > watches. > > This brings to the so called "Monkey Wrench". Now how many of you gents > know where that name came from?? When I started work as a machinist > apprentice at the railroad in 1953, I was issued a ball peen hammer, a > flashlight, a 10" Mill Bastard File, and was supposed to get a "Monkey Wrench", > but didn't. I still have the flashlight and it works as well as it did 60 years ago > though the reflector has darkened considerably. I have a couple of "Monkey > Wrenches" just as curiosities. > Now, who is going to get the cigar for explaining where Monkey Wrenches got > their name?? Alan, Tel, Clif, Al Messy????? Only reason I know is because I > accidentally saw it in my 1921 Audel's Mechanic's Manual. > > Jesse, > > > > I think that the terminology in the U.S. is "Turret lathe". They were > > the original "mass production" lathe. > > > > The capstan is a device sat on the cross slide of the lathe which > > indexes round every time the cross slide is wound to the right. The > > capstan is pivoted on a vertical axis and contains a number of tools > > (usually 6) located radially. > > > > Almost every bit of film showing factory work during WW2 shows Capstan > > lathes at work. > > > > Regards, > > > > Barrie > > > > > > ----- Original Message ----- > > From: "Jesse" <fernj1@xxxxxxxxxxx> > > To: <modeleng@xxxxxxxxxxxxx> > > Sent: Monday, September 24, 2012 4:56 PM > > Subject: [modeleng] Re: Parts prices > > > > > >> Well well, the roller box is very similar to my homemade box tool, > >> but of course much nicer. Both accomplish the same thing. No rollers > >> in my box tool though. I just use brass bushings that fit the stock > >> material which is mostly 5/16" or 1/4" in dia. > >> > >> Still nothing on a capstan lathe. Is this a type of lathe that is > >> installed on a sailing ship capstan???? > >> > >> Jesse the curious one in Troy Tennessee > >>> It's one of these: > >>> > >>> http://www.tangi-flow.com/rollerboxes.php > >>> > >>> Alan > >>> On 24/09/2012 01:02, AC Messer wrote: > >>>> I am familiar with a capstan lathe but I too am iterested as to > >>>> what is a "roller box". > >>>> > >>>> Al Messer > >>>> > >>> MODEL ENGINEERING DISCUSSION LIST. > >>> > >>> To UNSUBSCRIBE from this list, send a blank email to, > >>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the > >>> subject line. > >> MODEL ENGINEERING DISCUSSION LIST. > >> > >> To UNSUBSCRIBE from this list, send a blank email to, > >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the > >> subject line. > >> > > MODEL ENGINEERING DISCUSSION LIST. > > > > To UNSUBSCRIBE from this list, send a blank email to, > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, modeleng- > request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.