[SI-LIST] Re: 90 degree bend
- From: "Lee Ritchey" <leeritchey@xxxxxxxxxxxxx>
- To: "Andrew Ingraham" <a.ingraham@xxxxxxxx>, si-list@xxxxxxxxxxxxx
- Date: Mon, 30 Aug 2004 09:40:58 -0700
This is another of those statements that are not true and should not be
repeated. Where did this one start?
I use right angle bends in every signal, or rather, I allow them, even 2.4
GB/S.
How long will it take to get the misinformation purged from our profession?
Lee W. Ritchey
Speeding Edge
P. O. Box 2194
Glen Ellen, CA 95442
Phone- 707-568-3983
FAX- 707-568-3504
I just used the energy it took to be angry to write some blues.
Count Basie
> [Original Message]
> From: Andrew Ingraham <a.ingraham@xxxxxxxx>
> To: <si-list@xxxxxxxxxxxxx>
> Date: 8/30/2004 9:13:51 AM
> Subject: [SI-LIST] Re: 90 degree bend
>
> The other problem is that right-angle bends tend to concentrate etchant
and
> may result in over-etching the trace a bit in the corner. Presumably it
can
> lead to a break in the trace.
>
> For most of us, that's the reason why we don't use right-angle corners.
The
> electrical effects become noticeable if you're doing multi-GHz boards.
>
> Regards,
> Andy
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: 90 degree bend
- From: Kevin G. Rhoads
Other related posts:
- » [SI-LIST] 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- [SI-LIST] Re: 90 degree bend
- From: Kevin G. Rhoads