[SI-LIST] Re: 90 degree bend
- From: "Russell D. Moser" <r.moser@xxxxxxxxxxxxxxxxx>
- To: <julian.ferry@xxxxxxxxxx>, <weirsp@xxxxxxxxxx>, <pcb_user@xxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Mon, 30 Aug 2004 20:00:34 -0400
Yes, Julian; two wrongs don't make a right; but three lefts do.
Regards;
Russell D. Moser
Managing Director
Orion Group
r.moser@xxxxxxxxxxxxxxxxx
www.theoriongroup.net
717.914.0116
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx
> [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Julian Ferry
> Sent: Monday, August 30, 2004 6:20 PM
> To: 'weirsp@xxxxxxxxxx'; pcb_user@xxxxxxxxxxx; si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: 90 degree bend
>
> I became so frustrated with people telling me that I was
> setting myself up for doom by using 90 degree bends that I
> decided to eliminate them entirely just to silence the
> critics. I decided to replace them with 270 degree
> bends. I think people are too confused to argue with me now.....
>
> Julian Ferry
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx
> [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of steve weir
> Sent: Monday, August 30, 2004 1:51 PM
> To: pcb_user@xxxxxxxxxxx; si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: 90 degree bend
>
> See Scott's answer, believe Scott's answer. It is all in the
> dimensions.
>
> Steve
> At 12:49 PM 8/30/2004 +0100, New Bee wrote:
> >Hi
> >
> >I am a new PCB designer.
> >
> >I have a silly doubt - really do not know if I ask it in this forum.
> >
> >
> >why is it suggested not to have 90 degree bends for the traces while
> routing ?
> >
> >If some one can give me the electrical/electronics and manufacturing
> >reasons I will be greatful to them
> >
> >If this is not the right forum to address this please let me
> know where
> >can I ask
> >
> >Thanks in advance
> >Kam
> >
> >Yahoo! India Matrimony: Find your life partner online.
> >
> >
> >Yahoo! India Matrimony: Find your life partneronline.
> >
> >------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> >or to administer your membership from a web page, go to:
> >//www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >List FAQ wiki page is located at:
> > http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> >
> >List technical documents are available at:
> > http://www.si-list.org
> >
> >List archives are viewable at:
> > //www.freelists.org/archives/si-list
> >or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages
> >Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> >
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
