[SI-LIST] Re: 90 degree bend
- From: steve weir <weirsp@xxxxxxxxxx>
- To: pcb_user@xxxxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Mon, 30 Aug 2004 10:50:57 -0700
See Scott's answer, believe Scott's answer. It is all in the dimensions.
Steve
At 12:49 PM 8/30/2004 +0100, New Bee wrote:
>Hi
>
>I am a new PCB designer.
>
>I have a silly doubt - really do not know if I ask it in this forum.
>
>
>why is it suggested not to have 90 degree bends for the traces while routing ?
>
>If some one can give me the electrical/electronics and manufacturing
>reasons I will be greatful to them
>
>If this is not the right forum to address this please let me know where
>can I ask
>
>Thanks in advance
>Kam
>
>Yahoo! India Matrimony: Find your life partner online.
>
>
>Yahoo! India Matrimony: Find your life partneronline.
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] 90 degree bend
- From: New Bee
Other related posts:
- » [SI-LIST] 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- » [SI-LIST] Re: 90 degree bend
- [SI-LIST] 90 degree bend
- From: New Bee