[modeleng] Re: Scraping
- From: "Jesse Livingston" <fernj1@xxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Tue, 3 Jan 2006 18:32:04 -0600
Those el cheapo China/Tiawan 4" x 7" saws sold by most everyone for less
than 200 dollars US are an excellent investment and they work vertically as
well as horizontal. About the best investment for the money I have ever
made except for my lovely wife of over 50 years. All she cost in 1955 was a
couple of diamond rings and 10 dollars to the preacher. That was the best
move I ever made!!
Jesse in Tennessee USA
> Hi Ron
>
> I have just got rid of one! A most unsuccessful, badly-made job for
> cutting wood. I slowed it down for steel, but it did not work very well.
> I should welcome suggestions for a compact, accurate, inexpensive
> steel-cutting vertical bandsaw, capable of cutting a reasonable thickness.
>
> Cheers! Hubert
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
