MessageWhat exactly are the "old" thread feed rollers. My machine is less than 6 months old and I will NOT be happy if I cannot replace something when I need to! How do I know if I have the old thread feed rollers? Thanks, LuAnn ----- Original Message ----- From: Debra Hahn To: amayausers@xxxxxxxxxxxxx Sent: Tuesday, October 11, 2005 11:11 PM Subject: [amayausers] Re: Thread feed roller update!! VERY DISTRESSING since I do not have any problems with my rollers!!! Debby Hahn Coyote Design, Inc. -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover Sent: Tuesday, October 11, 2005 4:57 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Thread feed roller update!! Hey all, Just thought I'd drop in again and let every one know that didn't know (like me) but, I just had ordered this morning from Melco, some of the old thread feed rollers. and they called back later to tell me that Melco is no longer selling the old thread feed rollers. if you need some you either need to know someone who will sell you some of their extras or make your own, OR, upgrade for $95 to the new system. So hopefully all will go well when our first set shows up in a few days. I didn't realize that they were not going to support both systems. since I don't have much trouble with the old system. So just an FYI for anyone that might have needed more. you'll need to switch to the new system. Ron Vinyard Body Cover / Magic Stitches 1-888-435-0176 541-471-1504 fax 471-0427 420 SW H street Grants Pass, OR 97526 info@xxxxxxxxxxxxxxxxxxx www.bodycoverdesign.com