[amayausers] Re: Thread feed roller update!!
- From: "Debra Hahn" <dhahn@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 11 Oct 2005 22:11:21 -0500
VERY DISTRESSING since I do not have any problems with my rollers!!!
Debby Hahn
Coyote Design, Inc.
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover
Sent: Tuesday, October 11, 2005 4:57 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Thread feed roller update!!
Hey all,
Just thought I'd drop in again and let every one know that
didn't know (like me)
but, I just had ordered this morning from Melco, some of the old
thread feed rollers.
and they called back later to tell me that Melco is no longer
selling the old thread feed rollers.
if you need some you either need to know someone who will sell
you some
of their extras or make your own, OR, upgrade for $95 to the new
system.
So hopefully all will go well when our first set shows up in a
few days.
I didn't realize that they were not going to support both
systems.
since I don't have much trouble with the old system.
So just an FYI for anyone that might have needed more.
you'll need to switch to the new system.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427
420 SW H street
Grants Pass, OR 97526
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
Other related posts:
