Amen Wendy! Sue was going to place an order for 100 rollers this week to stock up in case we ever needed them....we don't like being 'forced' to upgrade either! From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx> Reply-To: amayausers@xxxxxxxxxxxxx Date: Wed, 12 Oct 2005 09:29:41 -0500 To: <amayausers@xxxxxxxxxxxxx> Subject: [amayausers] Re: Thread feed roller update!! That really irritates me. They aren't going to offer the old roller so basically we are FORCED to pay $95 to upgrade??? I don't like that at all!!!!! I have never had that much trouble with the old system and do not like being forced into spending my hard earned money on something that is unecessary. Wendy Solomonson Itchin' To Stitch Arlington, MN (507)964-2224 ----- Original Message ----- From: Body Cover <mailto:info@xxxxxxxxxxxxxxxxxxx> To: amayausers@xxxxxxxxxxxxx Sent: Tuesday, October 11, 2005 4:56 PM Subject: [amayausers] Thread feed roller update!! Hey all, Just thought I'd drop in again and let every one know that didn't know (like me) but, I just had ordered this morning from Melco, some of the old thread feed rollers. and they called back later to tell me that Melco is no longer selling the old thread feed rollers. if you need some you either need to know someone who will sell you some of their extras or make your own, OR, upgrade for $95 to the new system. So hopefully all will go well when our first set shows up in a few days. I didn't realize that they were not going to support both systems. since I don't have much trouble with the old system. So just an FYI for anyone that might have needed more. you'll need to switch to the new system. Ron Vinyard Body Cover / Magic Stitches 1-888-435-0176 541-471-1504 fax 471-0427 420 SW H street Grants Pass, OR 97526 info@xxxxxxxxxxxxxxxxxxx www.bodycoverdesign.com <http://www.bodycoverdesign.com>