[amayausers] Re: Thread feed roller update!!
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 11 Oct 2005 15:41:41 -0700
I would like to add that anyone who orders the new ones and is having troubles
with them they should contact Jeff Banks as he know a few things to check to
make sure they are working properly :)
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: Body Cover
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, October 11, 2005 2:56 PM
Subject: [amayausers] Thread feed roller update!!
Hey all,
Just thought I'd drop in again and let every one know that didn't know (like
me)
but, I just had ordered this morning from Melco, some of the old thread feed
rollers.
and they called back later to tell me that Melco is no longer selling the old
thread feed rollers.
if you need some you either need to know someone who will sell you some
of their extras or make your own, OR, upgrade for $95 to the new system.
So hopefully all will go well when our first set shows up in a few days.
I didn't realize that they were not going to support both systems.
since I don't have much trouble with the old system.
So just an FYI for anyone that might have needed more.
you'll need to switch to the new system.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427
420 SW H street
Grants Pass, OR 97526
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
Other related posts:
