[amayausers] Re: Thread feed roller update!!
- From: "image embriodery" <imageembroidery@xxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 12 Oct 2005 11:16:13 -0400
Thank You Wendy!
This just irritates me!! There is nothing wrong with the old rollers and if I
am not mistaken people have been complaining about the new ones, aren't they?
What if not all of my rollers need to be replaced? What is the upgrade?
Thanks,
LuAnn
----- Original Message -----
From: Itchin To Stitch
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, October 12, 2005 10:29 AM
Subject: [amayausers] Re: Thread feed roller update!!
That really irritates me. They aren't going to offer the old roller so
basically we are FORCED to pay $95 to upgrade??? I don't like that at all!!!!!
I have never had that much trouble with the old system and do not like being
forced into spending my hard earned money on something that is unecessary.
Wendy Solomonson
Itchin' To Stitch
Arlington, MN
(507)964-2224
----- Original Message -----
From: Body Cover
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, October 11, 2005 4:56 PM
Subject: [amayausers] Thread feed roller update!!
Hey all,
Just thought I'd drop in again and let every one know that didn't know
(like me)
but, I just had ordered this morning from Melco, some of the old thread
feed rollers.
and they called back later to tell me that Melco is no longer selling the
old thread feed rollers.
if you need some you either need to know someone who will sell you some
of their extras or make your own, OR, upgrade for $95 to the new system.
So hopefully all will go well when our first set shows up in a few days.
I didn't realize that they were not going to support both systems.
since I don't have much trouble with the old system.
So just an FYI for anyone that might have needed more.
you'll need to switch to the new system.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427
420 SW H street
Grants Pass, OR 97526
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
Other related posts:
