>From what I understand, if the roller is yellow, not black, you have the new one... On 10/16/05 8:57 PM, "r.rinehartsr" <drader@xxxxxxxxxxxxx> wrote: > Hey Ed, Can you tell me if I just bought my Amaya the middle of this past > August, does it have the new rollers or the old. All I can see is the red > roller. Thanks, Debbie in Indiana >> >> ----- Original Message ----- >> >> From: e3m@xxxxxxx >> >> To: amayausers@xxxxxxxxxxxxx >> >> Sent: Sunday, October 16, 2005 4:18 AM >> >> Subject: [amayausers] Re: Thread feed roller update!! >> >> >> >> >> >> Hey guys. Ed Orantes here. >> >> >> As for the new rollers, I was excited to learn of the improvements made to >> the entire thread feed roller system, not only the roller itself. If you >> didn't have any issues with your rollers before, replacing them periodically >> or not, then you shouldn't have any issues with the improved rollers as >> well. And if you did have issues with the previous rollers, then you'll >> really like the changes. >> >> >> >> >> >> Sure there's an initial cost with the yellow rollers, however in time, you >> should see a cost savings with respect to replacing them. >> >> >> >> >> >> Know that the current thread feed roller outer surface is yellow in color, >> no longer black, and improvements have been made in the rubber material, hub >> or axle of the roller, larger opening in the window of the new roller cover >> and ridges exist along the edge of the red pressure roller on top to add >> grippage(?) to the thread. So you see, it's not simply just a new roller >> but more an improved roller system. So when it's time to order more >> rollers, be sure to ask for the kit and not the only the rollers themselves. >> >> >> I've been using mine for several months now, not including time lost from >> Storm Runnin', and am pleased with what I see. >> >> >> Only precautions are to keep them free from oil and grease on the rubber >> surface. ...Which we should be observing no matter what rollers we're >> using. Also note that with the improved thread grippage(?), good results >> have been found running with a Material Thickness setting approximately one >> digit higher than with the older black rollers. >> >> >> The thread feed rollers serve two purposes.. one) to deliver the thread >> needed prior to the stitch, and two) holding on to the thread (without >> slippage) as the take up lever rises to the top of it's stroke to tighten >> the knot formed between the thread and bobbin on the underside of the >> garment. >> >> >> I only saw this "upgrade" as a positive and looked forward to having my >> Amayas equipped just as the latest machines. >> >> >> Just my thoughts.. >> >> >> >> >> >> Ed Orantes >> >> >> Amaya Tech and Tree Cutting & Trash Hauling Services >> >> >> New Orleans, La. >> >> >> 504-258-6260 >> >>> -------------- Original message from "Lee or Terri Hoover" >>> <lhoover2@xxxxxxxxxxxxxxxx>: -------------- >>> >>> >>> >>> >>> Ron, >>> >>> >>> >>> Thanks for the info and focusing on the positive. >>> >>> >>> >>> Terri >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> From: amayausers-bounce@xxxxxxxxxxxxx >>> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover >>> Sent: Wednesday, October 12, 2005 11:36 AM >>> To: amayausers@xxxxxxxxxxxxx >>> Subject: [amayausers] Re: Thread feed roller update!! >>> >>> >>> >>> >>> >>> I'm sure Jeff Banks can correct me if I'm wrong. >>> >>> >>> >>> The lady I talked to tells me the package contains >>> >>> >>> >>> 16 of each - New rollers- New roller covers (black thing with the groove) >>> >>> >>> >>> New Red rollers (don't know if they have arms too or just rollers) >>> >>> >>> >>> >>> >>> >>> >>> I also understand except for the few complaints we have read here, >>> >>> >>> >>> that they work quite well and have an expected life of a least a year! >>> >>> >>> >>> were the old ones are substantially less than that. >>> >>> >>> >>> >>> >>> >>> >>> I am looking forward to removing one more variable when it comes >>> >>> >>> >>> to looking for thread feed problems. I am trying to look for the positive. >>> >>> >>> >>> >>> >>> >>> >>> I too am not happy being forced into an upgrade when I didn't have >>> >>> >>> >>> problems with the old ones but, from the big corporate viewpoint >>> >>> >>> >>> if you have a better solution and it saves money and tech time >>> >>> >>> >>> trying to solve problems then I guess we should be happy they >>> >>> >>> >>> took the time to research and develop new rollers at all instead of >>> >>> >>> >>> looking at the old rollers as a profit center. >>> >>> >>> >>> >>> >>> >>> >>> I'll keep you all updated. >>> >>> >>> >>> >>> >>> >>> >>> Ron Vinyard >>> Body Cover / Magic Stitches >>> 1-888-435-0176 >>> 541-471-1504 >>> fax 471-0427 >>> >>> >>> >>> >>> >>> >>> >>> 420 SW H street >>> Grants Pass, OR 97526 >>> >>> >>> >>> >>> >>> >>> >>> info@xxxxxxxxxxxxxxxxxxx >>> www.bodycoverdesign.com <http://www.bodycoverdesign.com/> >>> >>> >>> >>> >>> >>>> >>>> >>>> >>>> ----- Original Message ----- >>>> >>>> >>>> >>>> From: David Lindsey <Vector Shirts> <mailto:david@xxxxxxxxxxxxxxxx> >>>> >>>> >>>> >>>> To: amayausers@xxxxxxxxxxxxx >>>> >>>> >>>> >>>> Sent: Wednesday, October 12, 2005 8:46 AM >>>> >>>> >>>> >>>> Subject: [amayausers] Re: Thread feed roller update!! >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> I hope the new rollers really last as long as they say they will because >>>> each one cost $5.80 for replacement. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> David >>>> >>>> >>>> >>>> Vector Shirts >>>> >>>>> >>>>> >>>>> >>>>> ----- Original Message ----- >>>>> >>>>> >>>>> >>>>> From: image embriodery <mailto:imageembroidery@xxxxxxxxxx> >>>>> >>>>> >>>>> >>>>> To: amayausers@xxxxxxxxxxxxx >>>>> >>>>> >>>>> >>>>> Sent: Wednesday, October 12, 2005 11:16 AM >>>>> >>>>> >>>>> >>>>> Subject: [amayausers] Re: Thread feed roller update!! >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Thank You Wendy! >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> This just irritates me!! There is nothing wrong with the old rollers and >>>>> if I am not mistaken people have been complaining about the new ones, >>>>> aren't they? >>>>> >>>>> >>>>> >>>>> What if not all of my rollers need to be replaced? What is the upgrade? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Thanks, >>>>> >>>>> >>>>> >>>>> LuAnn >>>>> >>>>>> >>>>>> >>>>>> >>>>>> ----- Original Message ----- >>>>>> >>>>>> >>>>>> >>>>>> From: Itchin To Stitch <mailto:itchin@xxxxxxxxxxxxxxx> >>>>>> >>>>>> >>>>>> >>>>>> To: amayausers@xxxxxxxxxxxxx >>>>>> >>>>>> >>>>>> >>>>>> Sent: Wednesday, October 12, 2005 10:29 AM >>>>>> >>>>>> >>>>>> >>>>>> Subject: [amayausers] Re: Thread feed roller update!! >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> That really irritates me. They aren't going to offer the old roller so >>>>>> basically we are FORCED to pay $95 to upgrade??? I don't like that at >>>>>> all!!!!! I have never had that much trouble with the old system and do >>>>>> not like being forced into spending my hard earned money on something >>>>>> that is unecessary. >>>>>> >>>>>> >>>>>> >>>>>> Wendy Solomonson >>>>>> Itchin' To Stitch >>>>>> Arlington, MN >>>>>> (507)964-2224 >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>> >>>>>>> >>>>>>> >>>>>>> From: Body Cover <mailto:info@xxxxxxxxxxxxxxxxxxx> >>>>>>> >>>>>>> >>>>>>> >>>>>>> To: amayausers@xxxxxxxxxxxxx >>>>>>> >>>>>>> >>>>>>> >>>>>>> Sent: Tuesday, October 11, 2005 4:56 PM >>>>>>> >>>>>>> >>>>>>> >>>>>>> Subject: [amayausers] Thread feed roller update!! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Hey all, >>>>>>> >>>>>>> >>>>>>> >>>>>>> Just thought I'd drop in again and let every one know that didn't know >>>>>>> (like me) >>>>>>> >>>>>>> >>>>>>> >>>>>>> but, I just had ordered this morning from Melco, some of the old thread >>>>>>> feed rollers. >>>>>>> >>>>>>> >>>>>>> >>>>>>> and they called back later to tell me that Melco is no longer selling >>>>>>> the old thread feed rollers. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> if you need some you either need to know someone who will sell you >>>>>>> some >>>>>>> >>>>>>> >>>>>>> >>>>>>> of their extras or make your own, OR, upgrade for $95 to the new >>>>>>> system. >>>>>>> >>>>>>> >>>>>>> >>>>>>> So hopefully all will go well when our first set shows up in a few >>>>>>> days. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> I didn't realize that they were not going to support both systems. >>>>>>> >>>>>>> >>>>>>> >>>>>>> since I don't have much trouble with the old system. >>>>>>> >>>>>>> >>>>>>> >>>>>>> So just an FYI for anyone that might have needed more. >>>>>>> >>>>>>> >>>>>>> >>>>>>> you'll need to switch to the new system. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Ron Vinyard >>>>>>> Body Cover / Magic Stitches >>>>>>> 1-888-435-0176 >>>>>>> 541-471-1504 >>>>>>> fax 471-0427 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 420 SW H street >>>>>>> Grants Pass, OR 97526 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> info@xxxxxxxxxxxxxxxxxxx >>>>>>> www.bodycoverdesign.com <http://www.bodycoverdesign.com/> >