[amayausers] Re: Thread feed roller update!!
- From: "Ruth Williams" <lrembroidery@xxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 12 Oct 2005 14:36:49 -0700
Aaron, Maybe I can buy your extral rollers and you can up date sooner.
Ruth
----- Original Message -----
From: Linen Barn
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, October 12, 2005 10:47 AM
Subject: [amayausers] Re: Thread feed roller update!!
I have been spending about $100 a month on rollers and am happy to see
something that will last longer. As soon as my black ones get low (I order 100
or so at a time) I am going to order the new kits and hopefully won't have to
spend so much monthly on rollers.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: D Stitch
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, October 12, 2005 10:38 AM
Subject: [amayausers] Re: Thread feed roller update!!
I've had my Machine for 3 years now. I have had all versions of the thread
feed rollers except for the newest one. I have had very little problems with
all of the rollers they have provided. I think it is very bad business on their
part to not at least notify their customers of the changes in advance so we
could stock up! This sort of business tactics really frustrates me about Melco.
I like their machine, but why do I need to always find out second hand when
something changes?? It can't be that difficult to notify the users of their
equipment since they have a list of us!!! Maybe it would be nice if they asked
for our feedback first??
Dianne
D-Stitch Embroider
----------------------------------------------------------------------------
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of David Lindsey <Vector
Shirts>
Sent: Wednesday, October 12, 2005 8:46 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Thread feed roller update!!
I hope the new rollers really last as long as they say they will because
each one cost $5.80 for replacement.
David
Vector Shirts
----- Original Message -----
From: image embriodery
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, October 12, 2005 11:16 AM
Subject: [amayausers] Re: Thread feed roller update!!
Thank You Wendy!
This just irritates me!! There is nothing wrong with the old rollers and
if I am not mistaken people have been complaining about the new ones, aren't
they?
What if not all of my rollers need to be replaced? What is the upgrade?
Thanks,
LuAnn
----- Original Message -----
From: Itchin To Stitch
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, October 12, 2005 10:29 AM
Subject: [amayausers] Re: Thread feed roller update!!
That really irritates me. They aren't going to offer the old roller so
basically we are FORCED to pay $95 to upgrade??? I don't like that at all!!!!!
I have never had that much trouble with the old system and do not like being
forced into spending my hard earned money on something that is unecessary.
Wendy Solomonson
Itchin' To Stitch
Arlington, MN
(507)964-2224
----- Original Message -----
From: Body Cover
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, October 11, 2005 4:56 PM
Subject: [amayausers] Thread feed roller update!!
Hey all,
Just thought I'd drop in again and let every one know that didn't
know (like me)
but, I just had ordered this morning from Melco, some of the old
thread feed rollers.
and they called back later to tell me that Melco is no longer selling
the old thread feed rollers.
if you need some you either need to know someone who will sell you
some
of their extras or make your own, OR, upgrade for $95 to the new
system.
So hopefully all will go well when our first set shows up in a few
days.
I didn't realize that they were not going to support both systems.
since I don't have much trouble with the old system.
So just an FYI for anyone that might have needed more.
you'll need to switch to the new system.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427
420 SW H street
Grants Pass, OR 97526
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
Other related posts:
