Hi Maks, just a quick comment as I am on the road , (like usual)... If the register does not exist on the device, i.e.: the table on the target device is of different (or smaller), or, you are trying to access a different type of data, ie, int vs a real, Double integer vs single integer, it will be upset. Modbus is a bit like mother-nature, don't mess with it, give it exactly what she expect, in other words, make sure data is mapped properly at both ends. Regards, Normand ________________________________________ From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Maks Wilde [makswilde@xxxxxxxxx] Sent: Thursday, March 05, 2015 12:01 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] FBM232 Modbus Setup Issues Dear List, I am setting up an FBM232 using Modbus TCP. The ECB200 and ECB201 blocks are both showing good in system manager and all good green in FoxView. As soon as I build an IIN or BIN block to try to read from the device my ECB201 block fails and reads: DVC FAIL (red) OFF SCAN (grey) DCI READY (cyan) DVC ENABLD (cyan) DVC FAIL (cyan) To get back online I have to delete the IIN/BIN block and disable then re-enable communication on the ECB201. I've set up the ECBs the same way I have for other working ones but the device I'm talking to is different. Any suggestions as to what could be wrong? How can I determine if the problem is on the Foxboro end or the slave device? Many thanks, Maks Wilde -- Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), are confidential, and may be privileged. If you are not the intended recipient, you are hereby notified that any review, retransmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return e-mail, and delete this message and any attachments from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________ *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave