Check the modbus slave address (typically 1 or 254). The ECB201 will fail once you have a block on scan but not successfully talking. On Thursday, March 5, 2015, Landry, Scott < Scott.Landry@xxxxxxxxxxxxxxxxxxxxxx> wrote: > > > > Check the protocol, Enron Modbus will not work with the standard FDSI > ModbusTCP driver. > > > Regards, > > > Scott > > ________________________________________ > From: foxboro-bounce@xxxxxxxxxxxxx <javascript:;> [ > foxboro-bounce@xxxxxxxxxxxxx <javascript:;>] On Behalf Of Maks Wilde [ > makswilde@xxxxxxxxx <javascript:;>] > Sent: Thursday, March 05, 2015 8:12 AM > To: foxboro@xxxxxxxxxxxxx <javascript:;> > Subject: Re: [foxboro] FBM232 Modbus Setup Issues > > Normand/Dirk, > Thank you for your replies. The device I'm trying to communicate with is a > Smith Meter Accuload III. Not sure if anyone has experience with these. > They have a lot of options on the device end of things and we're trying to > see if maybe something is not set right for the FDSI to communicate with > it. At this point I can't even read a single coil from it without faulting > the ECB201 block. > > Any other suggestions are very welcome :) > > Maks Wilde > > > > > -- > > Confidentiality Warning: This message and any attachments are intended > > only for the use of the intended recipient(s), are confidential, and may > be > > privileged. If you are not the intended recipient, you are hereby > notified > > that any review, retransmission, conversion to hard copy, copying, > > circulation or other use of this message and any attachments is strictly > > prohibited. If you are not the intended recipient, please notify the > sender > > immediately by return e-mail, and delete this message and any attachments > > from your system. > > > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx <javascript:;> > ?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx <javascript:;> > ?subject=leave > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > ______________________________________________________________________ > > *** Confidentiality Notice: This e-mail, including any associated or > attached files, is intended solely for the individual or entity to which it > is addressed. This e-mail is confidential and may well also be legally > privileged. If you have received it in error, you are on notice of its > status. Please notify the sender immediately by reply e-mail and then > delete this message from your system. Please do not copy it or use it for > any purposes, or disclose its contents to any other person. > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx <javascript:;> > ?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx <javascript:;> > ?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave