Check the protocol, Enron Modbus will not work with the standard FDSI ModbusTCP driver. Regards, Scott ________________________________________ From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Maks Wilde [makswilde@xxxxxxxxx] Sent: Thursday, March 05, 2015 8:12 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] FBM232 Modbus Setup Issues Normand/Dirk, Thank you for your replies. The device I'm trying to communicate with is a Smith Meter Accuload III. Not sure if anyone has experience with these. They have a lot of options on the device end of things and we're trying to see if maybe something is not set right for the FDSI to communicate with it. At this point I can't even read a single coil from it without faulting the ECB201 block. Any other suggestions are very welcome :) Maks Wilde > -- > Confidentiality Warning: This message and any attachments are intended > only for the use of the intended recipient(s), are confidential, and may be > privileged. If you are not the intended recipient, you are hereby notified > that any review, retransmission, conversion to hard copy, copying, > circulation or other use of this message and any attachments is strictly > prohibited. If you are not the intended recipient, please notify the sender > immediately by return e-mail, and delete this message and any attachments > from your system. > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________ *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave