Re: [foxboro] FBM232 Modbus Setup Issues

From: Maks Wilde <makswilde@xxxxxxxxx>
To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
Date: Thu, 5 Mar 2015 10:11:21 -0500
Thanks for all the fast replies! The key to reading values was to specify
the node number, so DVNAME : IP/1 did the trick.
There are many great tips here that I will also follow up on in terms of
modbus inspection as I go through the configuration of all my blocks.
Thank you again!

Maks Wilde

On Thu, Mar 5, 2015 at 9:58 AM, Pedro Ramos <pedro.ramos@xxxxxxxxx> wrote:

> For example, in RS-485, to read a flow in a RIN block:
> PNT_NO: 5A6466F4
>
> Meaning : Transaction nr 5, Modbus address 6466, Floating point format, 4
> bytes.
>
> In TCP mode, it would translate to:
> PNT_NO: 6466:F4
>
> Does this help ?
>
> Pedro Ramos
>
>
> -----Mensagem original-----
> De: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] Em
> nome de Pedro Ramos
> Enviada: quinta-feira, 5 de MarÃ§o de 2015 14:54
> Para: foxboro@xxxxxxxxxxxxx
> Assunto: Re: [foxboro] FBM232 Modbus Setup Issues
>
> We are communicating with accuload meters, by using a RS-485 FBM Modbus
> card (not TCP).
> Can we be of assistance ?
>
> Thanks,
> Pedro Ramos
>
> -----Mensagem original-----
> De: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] Em
> nome de Maks Wilde
> Enviada: quinta-feira, 5 de MarÃ§o de 2015 14:12
> Para: foxboro@xxxxxxxxxxxxx
> Assunto: Re: [foxboro] FBM232 Modbus Setup Issues
>
> Normand/Dirk,
> Thank you for your replies. The device I'm trying to communicate with is a
> Smith Meter Accuload III. Not sure if anyone has experience with these.
> They have a lot of options on the device end of things and we're trying to
> see if maybe something is not set right for the FDSI to communicate with
> it. At this point I can't even read a single coil from it without faulting
> the ECB201 block.
>
> Any other suggestions are very welcome :)
>
> Maks Wilde
>
>
>
> > --
> > Confidentiality Warning: This message and any attachments are intended
> > only for the use of the intended recipient(s), are confidential, and
> > may be privileged. If you are not the intended recipient, you are
> > hereby notified that any review, retransmission, conversion to hard
> > copy, copying, circulation or other use of this message and any
> > attachments is strictly prohibited. If you are not the intended
> > recipient, please notify the sender immediately by return e-mail, and
> > delete this message and any attachments from your system.
> >
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
> ________________________________
>
> Aviso: Este e-mail e quaisquer ficheiros informÃ¡ticos com ele transmitidos
> sÃ£o confidenciais e podem conter informaÃ§Ã£o legalmente privilegiada. Caso
> tenha recebido este e-mail indevidamente ou julgue nÃ£o ser o destinatÃ¡rio
> do mesmo, queira informar de imediato o remetente e proceder Ã  eliminaÃ§Ã£o
> desta mensagem. Ã estritamente proibido o uso, reencaminhamento ou
> reproduÃ§Ã£o nÃ£o autorizada desta mensagem e de quaisquer ficheiros nela
> contidos. Qualquer opiniÃ£o expressa na presente mensagem Ã© imputÃ¡vel
> somente Ã  pessoa que a enviou, a nÃ£o ser que o contrÃ¡rio resulte
> expressamente do seu texto. Como o correio electrÃ³nico pode ser afectado
> por dificuldades tÃ©cnicas ou operacionais, nÃ£o se garante a sua recepÃ§Ã£o 
> de
> forma adequada e atempada. A mensagem foi filtrada por um detector de vÃrus
> pelo que o remetente nÃ£o se responsabiliza por danos provocados por
> terceiros no sistema informÃ¡tico do destinatÃ¡rio.
>
> Warning: This e-mail and any files transmitted are confidential and may
> well also be legally privileged. If you are not the intended recipient or
> have received it in error or if you believe that you received a
> misaddressed e-mail transmission, please notify us immediately by reply
> e-mail and then delete this message from your system. Any unauthorized use,
> copying, disclosure or distribution of contents of this e-mail is strictly
> prohibited and may be unlawful. Unless otherwise stated, all views and
> opinion herein contained are solely the expression of the sender. As e-mail
> can be subject to operational or technical difficulties, the quality of
> reception may be affected and may be subjected to time delays. A virus
> checker sweeps outgoing e-mail. Therefore the sender doesn't accept any
> responsibility or liability whatsoever for any adverse effects on your
> systems or data arising from intercepted, corrupted or virus infected
> e-mail.
> __CUFdisclaimer2011__
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
> --
> Confidentiality Warning: This message and any attachments are intended
> only for the use of the intended recipient(s), are confidential, and may be
> privileged. If you are not the intended recipient, you are hereby notified
> that any review, retransmission, conversion to hard copy, copying,
> circulation or other use of this message and any attachments is strictly
> prohibited. If you are not the intended recipient, please notify the sender
> immediately by return e-mail, and delete this message and any attachments
> from your system.
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
References:
- [foxboro] FBM232 Modbus Setup Issues
  - From: Maks Wilde
- Re: [foxboro] FBM232 Modbus Setup Issues
  - From: Dirk Pauwels
- Re: [foxboro] FBM232 Modbus Setup Issues
  - From: Maks Wilde
- Re: [foxboro] FBM232 Modbus Setup Issues
  - From: Pedro Ramos
- Re: [foxboro] FBM232 Modbus Setup Issues
  - From: Pedro Ramos
Re: [foxboro] FBM232 Modbus Setup Issues

Other related posts:
