Re: [foxboro] CP60 will not boot
- From: "Boulay, Russ" <russ.boulay@xxxxxxxxxxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 14 Sep 2005 09:47:28 -0400
First thing to try and verify if it is your checkpoint file:
Make copy of your checkpoint file. DBLBUG.UC DBLBUG.dave
Then copy the resident backup checkpoint file BBLBUG.UC to DBLBUG.UC
Try reboot
If no reboot...then copy the DBLBUG.init to DBLBUG.UC
Try reboot...
If no reboot....then it's not your checkpoint file. (put DBLBUG.dave back)
You may have 2 hosts that are inadvertently trying to boot the CP60
Check for CMXLBUG.BIN file for that CP60 on more than one host.
Also run the utility /usr/fox/swi/ds_stasict LBUG to be sure the CP60 is
pointing to all the correct image files and and checkpoint files.
And of course the sum of the OS1C60 compared to other hosts that you may
have on your system, to verify that the actual image is ok.
There are more....but you can start there.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of David Johnson
Sent: Wednesday, September 14, 2005 9:19 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] CP60 will not boot
Hello all,
I attempted to reboot a CP60 yesterday (on purpose) and the CP will only
come back to the red-green boot indication. I tried swapping another CP60
with the same letterbug in its place and had the same result. Everything
was working prior to the reboot, ICC, FBMs, so the rack and cabling, seem
good. I think I might have a corrupted boot file. Assuming I have a
recent save-all, what is the best way to handle this.
Regards,
David Johnson
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
