Re: [foxboro] CP60 will not boot
- From: "Doucet, Terrence" <tdoucet@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 14 Sep 2005 11:50:59 -0400
David,
With only two stations on the node, you need to look at the node (did =
someone remove your terminators) and the DNBT as well as the CP60. The =
problem may not be with the software or the CP60. If you had one of the =
default station types and could boot it, that station you would know the =
node works.
The 51F would normally connect with RCNI. To use a DNBT, there were some =
setup steps. Maybe you need to re-check those steps.
Terry
-----Message d'origine-----
De=A0: foxboro-bounce@xxxxxxxxxxxxx =
[mailto:foxboro-bounce@xxxxxxxxxxxxx] De la part de David Johnson
Envoy=E9=A0: September 14, 2005 10:46 AM
=C0=A0: foxboro@xxxxxxxxxxxxx
Objet=A0: Re: [foxboro] CP60 will not boot
Thanks to everyone, but no luck yet.
Terry,
CP download is enabled.
Russ,
copied to BBXXXXXX.UC to DBXXXXXX.UC no luck
copied DBXXXXXX.init to DBXXXXXX.UC no luck.
put original DBXXXXXX.UC back.
All of the files pointed to look OK.
Angel,
looking for troubleshooting guide on TAC website.
Haven't found it yet.
Here's a better description of the problem.
AW51F is hosting this one CP only.
DNBT connects AW51F to rack with only DNBT and CP60 in the rack.
DNBT link light is green.
DNBT NODEBUS light will flash one time when the CP is reset (or push=20
pulled) then no more on that side.
DNBT TP Activity light flashes periodically (every 5 to 10 seconds)
Everything was communicating and working yesterday when I rebooted the =
AW,=20
(waited for it to come back up, and online), then rebooted the CP60. At =
that point I got stuck. Letterbug is correct and appears to be =
correctly=20
inserted, no bent pins. The CP has successfully rebooted in this=20
configuration about a week ago on a power outage. I have not made any=20
sysdef or image changes.
Any help would be appreciated.
Thanks,
David
=09
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
