Re: [foxboro] CP60 will not boot
- From: David Johnson <drjohn@xxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 14 Sep 2005 10:00:23 -0500
Good call Sven!
the message is
2005-09-14 09:49:54 AP0451 Process = romload_srvr SM_MSG 000001 OPERATION
FAILURE CON451 not inserted in configured node
Which is true.. this is a FT CP but I only have one of the pair
inserted. I would think it would boot as the primary, but apparently
not. I am getting some clips together to try making the hardware Fault
Tolerant. The weird thing is --- this has never had a mate in this rack,
and was working and has rebooted and worked for a fact!
I'll let you know what I find out.
Regards,
David
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
