Re: [foxboro] CP60 will not boot
- From: <tom.vandewater@xxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 14 Sep 2005 11:24:17 -0400
David,
You might check the letterbug in the DNBT as well as resetting
the DNBT or pull-push. We have had a DNBT that was green but not really
communicating before.
Tom
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of David Johnson
Sent: Wednesday, September 14, 2005 10:46 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP60 will not boot
Thanks to everyone, but no luck yet.
Terry,
CP download is enabled.
Russ,
copied to BBXXXXXX.UC to DBXXXXXX.UC no luck
copied DBXXXXXX.init to DBXXXXXX.UC no luck.
put original DBXXXXXX.UC back.
All of the files pointed to look OK.
Angel,
looking for troubleshooting guide on TAC website.
Haven't found it yet.
Here's a better description of the problem.
AW51F is hosting this one CP only.
DNBT connects AW51F to rack with only DNBT and CP60 in the rack.
DNBT link light is green.
DNBT NODEBUS light will flash one time when the CP is reset (or
push=20
pulled) then no more on that side.
DNBT TP Activity light flashes periodically (every 5 to 10
seconds)
Everything was communicating and working yesterday when I
rebooted the AW,=20
(waited for it to come back up, and online), then rebooted the CP60. At
that point I got stuck. Letterbug is correct and appears to be
correctly=20
inserted, no bent pins. The CP has successfully rebooted in this=20
configuration about a week ago on a power outage. I have not made any=20
sysdef or image changes.
Any help would be appreciated.
Thanks,
David
=09
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
