Dave: Remove the letterbug, spit on the pins, reinsert the litterbug. On 9/14/2005 9:45:32 AM, foxboro@xxxxxxxxxxxxx wrote: > Thanks to everyone, but no luck yet. > > > > Terry, > > CP download is enabled. > > Russ, > > copied to BBXXXXXX.UC to DBXXXXXX.UC no luck > > copied DBXXXXXX.init to DBXXXXXX.UC no luck. > > put original DBXXXXXX.UC back. > > > > All of the files pointed to look OK. > > > > Angel, > > looking for troubleshooting guide on TAC website. > > Haven't found it yet. > > > Here's a better description of the problem. > > AW51F is hosting this one CP only. > > DNBT connects AW51F to rack with only DNBT and CP60 in the rack. > > DNBT link light is green. > > DNBT NODEBUS light will flash one time when the CP is reset (or push > > pulled) then no more on that side. > > DNBT TP Activity light flashes periodically (every 5 to 10 seconds) > > > > Everything was communicating and working yesterday when I rebooted the AW, > > > (waited for it to come back up, and online), then rebooted the CP60. At > > that point I got stuck. Letterbug is correct and appears to be correctly > > > inserted, no bent pins. The CP has successfully rebooted in this _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave