Re: [foxboro] CP60 will not boot
- From: "Corbera, Angel" <angel.corbera@xxxxxxxxxxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 15 Sep 2005 15:00:39 -0400
Dave,
On a single node system, the NSAP addresses for all the stations (host, CPs,
etc) should be: "000001"
The command fist should report for the CP host, and any other online
stations: "I000001"
On a multi-node system, the NSAP addresses would be: "000101", "000102",
"000103",...
One number for each different node.
Command fist should report: "I000101", "I000102", "I000103", etc
My advise:
Go to /usr/fox/sp of the boot host and type:
grep ADRNSP IIF.prm | sort +5
Column 6 will show the 'node' where the CP/AW/station (column 2) is supposed
to be.
Example (for a multi-node system):
3AWE01# grep ADRNSP IIF.prm |sort +5
2AP201 2AP201 OS3FS3 ADRNSP 001 000102 000000
2AP201 2COM01 OS1CS ADRNSP 001 000102 000000
2AP201 2CP401 OS1C40 ADRNSP 001 000102 000000
3AWD01 NODE02 OS1LI ADRNSP 001 000102 000000
...
03AWG1 03AWG1 OS6AW1 ADRNSP 001 000103 000000
3AWD01 3COM01 OS1CS ADRNSP 001 000103 000000
3AWD01 3CP101 OS1UC ADRNSP 001 000103 000000
3AWD01 3CP301 OS1C30 ADRNSP 001 000103 000000
3AWD01 3MG301 OS1MG3 ADRNSP 001 000103 000000
3AWD01 FOXW01 OS1C4B ADRNSP 001 000103 000000
3AWD01 NODE03 OS1LI ADRNSP 001 000103 000000
...
4APB01 4APB01 OS6FS1 ADRNSP 001 000104 000000
4APB01 4CP301 OS1C30 ADRNSP 001 000104 000000
4APB01 4CP3B1 OS1C3B ADRNSP 001 000104 000000
4APB01 4CP401 OS1C40 ADRNSP 001 000104 000000
4APB01 4CP601 OS1C60 ADRNSP 001 000104 000000
4APB01 4CP602 OS1C60 ADRNSP 001 000104 000000
4APB01 NODE04 OS1LI ADRNSP 001 000104 000000
4AWB01 4AWB01 OS6AW1 ADRNSP 001 000104 000000
Your CP will try to boot using the NSAP address of its Comex file
(/usr/fox/sp/files/CMXcplbug.BIN)
Use bpatch and verify if matches the one from IIF.prm in the boot host.
If either the host or the CP are in the wrong node, the CP will not boot.
(If 'fist' reports "000001" and not "I000001", use Russ advice to fix it).
I will use the line you sent:
2005-09-15 12:00:05 (romload_srvr) -39 0 ( ) (Load terminated on
(CON451) - Wrong Node)
to update my troubleshooting guide.
Thanks
Angel Corbera
Invensys - The Foxboro Company
Technical Assistance Center (Systems)
33 Commercial Street (B52-AA), Foxboro, MA 02035
Ph: 866-PHONIPS (866-746-6477); Fax: 508-549-4492
Please mark your calendar for the 2005 Invensys Process Systems Customer
Conference, October 3rd - 6th 2005 - Houston, TX. For more information,
please visit www.invensys.com/usergroup2005
<http://www.invensys.com/usergroup2005>.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of David Johnson
Sent: Thursday, September 15, 2005 1:26 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP60 will not boot
OK,
I think we're getting somewhere, but I don't understand how the problem
occurred or how to fix it.
Here is what the file /usr/fox/sysmgr/softmgr/smon_errs contains after
trying to boot the CP twice.
2005-09-15 12:00:05 (romload_srvr) -39 0 ( ) (Load terminated on (CON451)
- Wrong Node)
2005-09-15 12:02:50 (romload_srvr) -39 0 ( ) (Load terminated on (CON451)
- Wrong Node)
And here are the results from fist
Station Identifier Address (hex) Error description
-----------------------------------------------------
AP0451 000001 0003BACDA7F2
I'm reviewing the notes that Tom V. and Angel C. sent. But if the solution
is now obvious to you, it's certainly not to me.
Any help still appreciated.
Regards,
David Johnson
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
