So, instead of flying using an FSP flight plan for these flights, just open up
FSX Pilot, when simulator loaded up at the departure active runway, use
something like “select CYXY” into the console and “Run takeoff”? Or do I do the
select command after takeoff.
I can use FSP plans for the airline flights.
On Jul 11, 2017, at 4:24 PM, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Orin,
Probably the best thing to do would be to request a visual approach using
PF3, and then use some of the FSX Pilot auto landing options to an actually
get down. One thing that’s worth noting about FSP flight plans is that
they’re intended to mostly be executed automatically. When flying a plane
manually you really don’t need one.
For FS Economy purposes, it’s probably sufficient to fly direct from airport
to airport, especially in super remote areas like Alaska. That’s what the
“select,” command in FSX Pilot is for.
Best,
Zack.
On Jul 11, 2017, at 1:19 PM, Joshua Tubbs <orin8722@xxxxxxxxx> wrote:
Zack,
How do I Taylor my FSP txt plan to work with ATC? With imported flight
plans, FSXPilots landing procedure that it creates lands at a random runway.
I’ve figured out how to select runways manually, but how to actually land
when PF3 clears me, as FSXPilot will land sometimes while PF3 is still in
approach phase.
It’s really hard to know which command for auto land to use at these alaskan
airports. I’ve crashed several times and it’s stacked against me when I
can’t see the train I’m flying into.
I get quite a bit of FSE money with this group, so I’d like to be able to
land successfully in this type of turbine.
On Jul 11, 2017, at 1:10 PM, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Declan and Moritz,
You don’t need a flight plan at all. FSX Pilot can actually fly you pretty
much anywhere, and includes commands to try to land in weird terrain, which
might help in really remote airports. It can also fly you via airways,
which is helpful if you’re flying with ATC coverage or with a flight plan
you create yourself.
One thing which is important to emphasize is that just because FSX Pilot
doesn’t integrate support for ATC, that doesn’t mean you can’t use them
together. You can certainly fly with default ATC, or any of the third-party
add-ons.
Best,
Zack.
On Jul 11, 2017, at 9:54 AM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
I like the idea of being able to fly around, if I want to land somewhere
though what are the chances that FSX pilot would be able to get me down
Sent from my iPhone
On 11 Jul 2017, at 17:12, Moritz Grandjean <moritz.grandjean@xxxxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
Josh.
Hmm good, that can be actually something for regional flights, I
actually like the feature where you can just look what's nearby.
Do I actually need a flight plan or can I just set up an aircraft at a
random runway or helipad at a random airport, take off and randomly fly
to different locations on the map?
Greetings Moritz.
Am 7/11/2017 um 5:13 PM schrieb Joshua Tubbs:
It is useful because with things like regional flights, you don’t
*need* ATC. Most times, the sighted pilots I see on streams use VFR
rules for the majority of, say, FSEconomy flights, etc.
Also, since I’m trying to gravitate away from IYP, it’s also useful
in that regard. I want to fly more aircraft, and the fact that IYP
won’t ever be updated with more supported aircraft… reason enough
right there to stop, or at least attempt, to stop using it.
On Jul 10, 2017, at 8:03 PM, Moritz GrandjeanBlind and Visually impaired Pilots mailinglist
<moritz.grandjean@xxxxxxxxxxx> wrote:
Good evening.
I have a recently downloaded the share ware version of Fsx pilot. But
to be honest, I can't really figure out what the advantage of the
program is. If I heard right, you don't even have air traffic control
coverage. So, what makes this program better as it's your plane? Or in
which situations is it useful?
Von meinem iPhone gesendetBlind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
–)ÝjwUŠËš–\¢š–¢çOŠZ-²f¢–)à–+-†Ûiÿü0ÁúÞzX¬¶Ê+ƒùb²ßÛ¾*b–‹lNŠh²Ö¦zËëh¶¥ŠËlzwZ™ë,j¡»â¦)h¶Çëyéb²Û(®èº{.nÇ+‰·¬zwZ™ë,j¡»â¦)h¶Êު笵úÞzX¬¶Ê+©Ý¦ëm…ì(Û§²æìr¸›z)í…ë.n7œ¶‡ò¢êæzËáh®‹azº)¶*'²Ëœ…« Š¬¶Ç§u©ž²Æ
zÚ¾*b–‹lê®zË_祊Ël¢¸Ún¶Ø^Š݅éiŠ{azË›ç-¡ü¨º¹ž²Æ
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
