Re: [ARMini-support] ARMX6 HDMI/video/audio ROM now live
- From: A Rawnsley <rcomp@xxxxxxxxxxx>
- To: <armini-support@xxxxxxxxxxxxx>
- Date: Sun, 24 Jan 2016 11:29:29 GMT
I to have an LG Television/Monitor (Supplied through RComp) but have
yet to get sound through my HDMI Cable it would be great if I could.
Have you tried the lastest build?
David
I have tried !iMX6upg although I have not put it into the !Boot yet
tried a Cd and had Sound out of the jack at the Back of my ARMX6
although I have two Female Jack Sockets at the front on the Comuper.
The procedure is as follows:
1) Run !iMX6upg (only needs to be done once - the update is then
installed for the future - do *not* put this in !Boot).
2) Reboot computer to make the upgraded OS rom take effect
3) Computer behaviour should be exactly as before update
4) Do *readedid to read capabilities of screen
5) or simply run HDMIaudon file to do step 4 and enable HDMI
audio.
Only step 5 is needed once the computer has the new OS installed, so if
you like the results, *that's* what you'd put in !boot.
Once HDMIaudon is run, audio will be via the HDMI port, not the jack
plugs. You can actually switch back to the jack plus "as needed", but I
didn't produce the necessary obey file - I felt that a reboot was an
acceptable solution for now (either you want it via HDMI or you don't).
Hope this helps.
Andrew
--
R-Comp
22 Robert Moffat, High Legh, Knutsford, Cheshire WA16 6PS
Tel: 01925 755043 Fax: 01925 757377
http://www.rcomp.co.uk
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
