Re: [ARMini-support] ARMX6 HDMI/video/audio ROM now live
- From: "Richard Torrens (RISC OS)" <RISCOS@xxxxxxxxxxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Thu, 21 Jan 2016 14:43:35 +0000 (GMT)
In article <554571bd6cjcgl@xxxxxxxxxxxxxxx>,
Jim Lesurf <jcgl@xxxxxxxxxxxxxxx> wrote:
In article <55456c7d59RISCOS@xxxxxxxxxxxxxx>, Richard Torrens (RISC OS)
<RISCOS@xxxxxxxxxxxxxx> wrote:
I have just received a Y adaptor so I can feeed the monitor and the TV
HDMI in parallel.
But if I turn the monitor off - the computer gives no signal to the TV!
So clearly the new software is being a bit too clever and detecting the
monitor is off! It's not a real problem, but I thought I should report
it.
Which of the two does the ARMX6 detect and report on? Does it matter
which output port the TV/monitor are connected to, or which is turned on
first?
The 'Y splitter' presumable has to be active in some way, so may
intervene itself.
As I said - it's not a problem so I don't intend to investigate (partly
because of the effect - it's not easy to investigate with no display!).
And there may well be some assymetry.
Both devices are 1080p, so give identical modes.
The main point was - I cannot understand the logic of switching video off
when no display is detected! It seems a bit pointless - and there are
many HDMI adaptor leads which may well be used with monitors which don't
do the necessary.
--
Richard Torrens - riscos@xxxxxxxxxxxxxx
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
