[argyllcms] Re: FW: Profiling Epson ABW Print Driver

  • From: "Alan Goldhammer" <agoldhammer@xxxxxxxxxxx>
  • To: <argyllcms@xxxxxxxxxxxxx>
  • Date: Thu, 07 Jul 2011 17:59:29 -0400

Thanks!  This one works and I get even spread throughout the range!!


-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Florian Höch
Sent: Thursday, July 07, 2011 5:38 PM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: FW: Profiling Epson ABW Print Driver


I think you'll need to use the -s parameter instead of -f:
targen -d 0 -s 51 filename

(I remember using -d 0 with -g in the past at first and having the same 
problem like you until I learned that -g is only for CMY and RGB)


Am 07.07.2011 21:44, schrieb Alan Goldhammer:
> Uli,
> Yes, I know I can do it that way.  What I don't understand is why I cannot
> create a simple 51 step B/W target with Argyll.  I've tried changing
> every parameter but nothing seems to work; I always get two white patches
> and 49 shades of grey.  As a result there is no 50% grey patch.  I don't
> know if this is why it cannot be read by QTR.
> Alan

Florian Höch

Other related posts: