This brings up another question. Does RAID 0 so better performance than just a stand alone HD configuration? Rusty On 1/24/06, Joe Shonk <joe.shonk@xxxxxxxxx> wrote: > > The IBM HS20 and HP BL35p (SAS) seems to be lacking in the Raid Controller > cache arena as well... Enough so, that one customer is considering > abandoning RAID 1 in favor of a RAID 0 configuration... Initial benchmarks > are showing a HUGE improvement in Read, Writes, and overall performance. > But of course, you loose that redundancy. > > Joe > > On 1/24/06, Rusty Yates <rusty27@xxxxxxxxx> wrote: > > > > Just heard back from our outside sales from Dell and was told that one > > customer did a major test with Citrix and the Dell 1855 Blades and found > > that Citrix ran 30% slower due to no enough cache on the Raid Controller in > > their blades. Anyway the outside sales guy is recommending us to go with > > the 1850 1u servers instead which basically defects the purpose of going to > > blades (ex: density, wiring, power, etc......). Never thought I would > > actually hear a sales rep recommend against their own product. > > > > Anyway, just thought I would pass this along. > > > > Rusty > > > > > > On 1/24/06, Rusty Yates <rusty27@xxxxxxxxx> wrote: > > > > > > I appreciate all the information from everyone. From all the research > > > that we've done we are hoping to go with IBM Servers and Blades but if the > > > pricing isn't close we will most likely choose Dell. We understand IBM is > > > going to have better management, denisty, etc and if money wasn't a factor > > > IBM would be our #1 choice. But on the flip side with Dell, we are a Dell > > > shop, the Dell pricing is better, and Dell's support has been great. > > > > > > I will say I'm very disappointed that no one brought up Hitachi's > > > Blade Servers or even Silicon Blade Servers. :-) > > > > > > Thanks again for all the information and laughs! > > > > > > Rusty > > > > > > > > > On 1/21/06, Rusty Yates <rusty27@xxxxxxxxx> wrote: > > > > > > > > I would like to know if anyone on this board has had any good or bad > > > > experience with the Dell PowerEdge 1855 Blade Servers. We are currently > > > > taking a hard look at using the Dell Blades for our Citrix Servers. > > > > > > > > Thanks in advance! > > > > > > > > Rusty > > > > > > > > > > > > >