Don't forget JST battery connectors, you can get hoards from China if you
don't mind waiting a week for shipping:
http://www.ebay.com/itm/10-Pairs-150mm-Male-Female-2-Pin-JST-Connector-Plug-for-RC-Lipo-Battery-Part-E0-/161479501111?pt=LH_DefaultDomain_0&hash=item2598eda537
The male end is on the battery, female is on the connector end. You can
also order locally from Fremont here:
http://www.batteryspace.com/connectoradaptorapairofbecmalefemaleconnectors6long22awg.aspx
Or I can bring you a few (I have bags of them)
On Sat, Jul 11, 2015 at 11:12 AM, James Dougherty <jafrado@xxxxxxxxx> wrote:
Stratalogger CF uses 4-16V, I've had good luck with the 7.4v LiPo's Bob F.
recommended and have since used them in all
my flights - no problems.
I use this LiPo battery -
https://www.all-battery.com/74volt-900mah25cli-polylipobatterypackforcx2helicopter.aspx
you can also get the 10C version which is a better deal:
https://www.all-battery.com/two74volt-900mah10chighrateli-polypackforbladecx.aspx
2 for the price of one!
Get the Featherweight mag switch -
http://www.shop.featherweightaltimeters.com/product.sc?productId=33&categoryId=2
and this is the charger to get -
https://www.all-battery.com/TenergyBalanceCharger-01267.aspx
On Sat, Jul 11, 2015 at 11:01 AM, Ben Sandoval <yobenflstf@xxxxxxxxxxxxx>
wrote:
Which battery are you using for your stratologger cf. I'm getting ready
to order a few batteries and I'm still on the fence. Appreciate your input.
