Manual says standard 9v is all you need.
On Mon, Jul 13, 2015 at 2:39 PM, Peter Hackett <
peter.hackett@xxxxxxxxxxxxxxxx> wrote:
I've always used a standard 9V alkali battery. Never had any battery
problems with it.
On Mon, Jul 13, 2015 at 2:07 PM, Steve Sawyer <steve@xxxxxxxxxxxxxxxx>
wrote:
I've been using 180mah 3S 25~40C Lipos.
For the stratologger CF required protection of the FETs (i.e.,
short-circuit or 1 Ohm pyros), I use series 3 Ohm resistors on each output.
Lots of flights are possible.
Steve
*From:* tccrockets-bounce@xxxxxxxxxxxxx [mailto:
tccrockets-bounce@xxxxxxxxxxxxx] *On Behalf Of *Ben Sandoval
*Sent:* Saturday, July 11, 2015 11:01 AM
*To:* TCC Chat
*Subject:* [tccrockets] battery for stratologger CF
Which battery are you using for your stratologger cf. I'm getting ready
to order a few batteries and I'm still on the fence. Appreciate your input.