Yes 9v works well...
but they are not very chic
Jimmy F.
TRA 12524
From: Mike Smith
Sent: Monday, July 13, 2015 3:45 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: battery for stratologger CF
9 Volt battery always worked fine
On Monday, July 13, 2015, Steve Sawyer <steve@xxxxxxxxxxxxxxxx> wrote:
I've been using 180mah 3S 25~40C Lipos.
For the stratologger CF required protection of the FETs (i.e., short-circuit
or 1 Ohm pyros), I use series 3 Ohm resistors on each output.
Lots of flights are possible.
Steve
From: javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');
[mailto:javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');] On
Behalf Of Ben Sandoval
Sent: Saturday, July 11, 2015 11:01 AM
To: TCC Chat
Subject: [tccrockets] battery for stratologger CF
Which battery are you using for your stratologger cf. I'm getting ready to
order a few batteries and I'm still on the fence. Appreciate your input.
--
Sent from Gmail Mobile
