These seem to be pretty popular:
https://www.sparkfun.com/products/10718
4.2v 400mA lipos from SparkFun
I haven't used mine yet, but I'm going to use one with my RRC2+ as a backup
altimeter in my 54mm minimum diameter rocket for Aeronaut.
On Mon, Jul 13, 2015 at 3:06 PM, David Robb <robbdm@xxxxxxxxxxx> wrote:
True, I was looking for something smaller to fit more in crowded ebays
==================
David M. Robb
robbdm@xxxxxxxxxxx
----- Original Message -----
From: Mike Hubble <michaelhubble87@xxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Mon, 13 Jul 2015 22:02:00 -0000 (UTC)
Subject: [tccrockets] Re: battery for stratologger CF
Manual says standard 9v is all you need.
On Mon, Jul 13, 2015 at 2:39 PM, Peter Hackett <
peter.hackett@xxxxxxxxxxxxxxxx> wrote:
I've always used a standard 9V alkali battery. Never had any battery
problems with it.
On Mon, Jul 13, 2015 at 2:07 PM, Steve Sawyer <steve@xxxxxxxxxxxxxxxx>
wrote:
I've been using 180mah 3S 25~40C Lipos.
For the stratologger CF requiredprotection of the FETs (i.e.,
short-circuit or 1 Ohm pyros), I use series 3 Ohm resistors on each output.
Lots of flights are possible.
Steve
*From:*tccrockets-bounce@xxxxxxxxxxxxx [mailto:
tccrockets-bounce@xxxxxxxxxxxxx] *On Behalf Of *Ben Sandoval
*Sent:* Saturday, July 11, 2015 11:01 AM
*To:* TCC Chat
*Subject:* [tccrockets] battery for stratologger CF
Which battery are you using for your stratologger cf. I'm getting ready
to order a few batteries and I'm still on the fence. Appreciate your input.
