True, I was looking for something smaller to fit more in crowded ebays
==================David M. Robbrobbdm@xxxxxxxxxxx
----- Original Message -----From: Mike Hubble <michaelhubble87@xxxxxxxxx>To:
tccrockets@freelists.orgSent: Mon, 13 Jul 2015 22:02:00 -0000 (UTC)Subject:
[tccrockets] Re: battery for stratologger CF
Manual says standard 9v is all you need.
On Mon, Jul 13, 2015 at 2:39 PM, Peter Hackett <peter.hackett@xxxxxxxxxxxxxxxx>
wrote:
I've always used a standard 9V alkali battery. Never had any battery problems
with it.
On Mon, Jul 13, 2015 at 2:07 PM, Steve Sawyer <steve@xxxxxxxxxxxxxxxx> wrote:
I've been using 180mah 3S 25~40C Lipos.
For the stratologger CF requiredprotection of the FETs (i.e., short-circuit or
1 Ohm pyros), I use series 3 Ohm resistors on each output.
Lots of flights are possible.
Steve
From:tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx]
On Behalf Of Ben SandovalSent: Saturday, July 11, 2015 11:01 AMTo: TCC
ChatSubject: [tccrockets] battery for stratologger CF
Which battery are you using for your stratologger cf. I'm getting ready to
order a few batteries and I'm still on the fence. Appreciate your input.
