You will :-)
On Mon, Jul 13, 2015 at 5:32 PM, Chris Attebery <chrisattebery1971@xxxxxxxxx
wrote:
I wish I had that problem.
On Monday, July 13, 2015, James Dougherty <jafrado@xxxxxxxxx> wrote:
Nice!
Sure, 9V Duracell is tip-top.
But ... wait until you throw out a 9V every month and then you'll realize
there are better options :-)
On Mon, Jul 13, 2015 at 4:11 PM, Chris Attebery <
chrisattebery1971@xxxxxxxxx> wrote:
Personally I stick to 9V unless there are space restrictions. Sometimes
you need something smaller though:
On Mon, Jul 13, 2015 at 4:06 PM, Jimmy Franco <Aldocyber3@xxxxxxx>
wrote:
Yes 9v works well...
but they are not very chic
Jimmy F.
TRA 12524
*From:* Mike Smith
*Sent:* Monday, July 13, 2015 3:45 PM
*To:* tccrockets@xxxxxxxxxxxxx
*Subject:* [tccrockets] Re: battery for stratologger CF
9 Volt battery always worked fine
On Monday, July 13, 2015, Steve Sawyer <steve@xxxxxxxxxxxxxxxx> wrote:
I've been using 180mah 3S 25~40C Lipos.
For the stratologger CF required protection of the FETs (i.e.,
short-circuit or 1 Ohm pyros), I use series 3 Ohm resistors on each
output.
Lots of flights are possible.
Steve
*From:*
javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');
[mailto:
javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');] *On
Behalf Of *Ben Sandoval
*Sent:* Saturday, July 11, 2015 11:01 AM
*To:* TCC Chat
*Subject:* [tccrockets] battery for stratologger CF
Which battery are you using for your stratologger cf. I'm getting
ready to order a few batteries and I'm still on the fence. Appreciate your
input.
--
Sent from Gmail Mobile
--
Sent from Gmail Mobile