[tccrockets] Re: battery for stratologger CF

  • From: Chris Attebery <chrisattebery1971@xxxxxxxxx>
  • To: tccrockets <tccrockets@xxxxxxxxxxxxx>
  • Date: Mon, 13 Jul 2015 16:11:41 -0700

Personally I stick to 9V unless there are space restrictions. Sometimes you
need something smaller though:


​

On Mon, Jul 13, 2015 at 4:06 PM, Jimmy Franco <Aldocyber3@xxxxxxx> wrote:

Yes 9v works well...
but they are not very chic

Jimmy F.
TRA 12524

*From:* Mike Smith <msmith9144@xxxxxxxxx>
*Sent:* Monday, July 13, 2015 3:45 PM
*To:* tccrockets@xxxxxxxxxxxxx
*Subject:* [tccrockets] Re: battery for stratologger CF

9 Volt battery always worked fine

On Monday, July 13, 2015, Steve Sawyer <steve@xxxxxxxxxxxxxxxx> wrote:

I've been using 180mah 3S 25~40C Lipos.

For the stratologger CF required protection of the FETs (i.e.,
short-circuit or 1 Ohm pyros), I use series 3 Ohm resistors on each output.

Lots of flights are possible.



Steve



*From:* javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');
[mailto:javascript:_e(%7B%7D,'cvml','tccrockets-bounce@xxxxxxxxxxxxx');] *On
Behalf Of *Ben Sandoval
*Sent:* Saturday, July 11, 2015 11:01 AM
*To:* TCC Chat
*Subject:* [tccrockets] battery for stratologger CF



Which battery are you using for your stratologger cf. I'm getting ready
to order a few batteries and I'm still on the fence. Appreciate your input.



--
Sent from Gmail Mobile

JPEG image

Other related posts:

  1. Home
  2. tccrockets
  3. Archive
  4. 07-2015