[TechAssist] Re: 220v
- From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 20 Dec 2002 19:51:33 -0500
Look at the nameplate on the back. If it is a multivoltage model it will say
so. Going from country to country, you find household distribution voltages
from 100 to 220 and frequencies from 50 to 50. The plugs are usually
different too. You can buy international adapter plug sets containing a half
dozen or so plug adapters.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
864 232 3889
Fax 271 2080
mailto:greentron@xxxxxxx
----- Original Message -----
From: "Electric Medic" <info@xxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, December 19, 2002 6:41 PM
Subject: [TechAssist] Re: 220v
>
> We STILL have not answered the QUESTION. Does this guys set work on
> 220volts. He said the set worked on 110v but not properly on 220v. I can
not
> believe that the set was designed to work on 220v using the same power
cord
> that came with the set. Every 220v circuit I have seen here in the states
> has a different cord (larger plug) with two hots. Is this some special
> CTC187AD. I think this is important enough to answer. We all know that 220
> has to hots and a neutral, and 110 has one hot and a neutral. I am
> interested how in the world he is plugging a CTC187 into a 220v outlet.
> Please someone, or the owner of the set EXPLAIN. Everyone that I have seen
> will smoke if you apply 220v. This is driving me crazy. Why would anyone
> want to run his set on both 110v and 220v anyway? It seems to me if it
> worked on 110v, that should be good enough. Very confused here in Georgia.
>
> Perry Bower
> Electric Medic
> "It's Cheaper to Keep Her"
> http://www.electricmedic.com
> Check out the Electronic Repair Screensaver We created. More Images to
come!
> To download these Collections you must first install the Eyetide Viewer:
>
http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVGC
> "We're Number One Where it Really Counts, With our Customers"
> 3850 Washington Road Suite 5b
> Martinez, Georgia 30907
> Phone: 706-8MEDIC4 (863-3424)
> Phone: 706-863-3474
> Fax: 706-863-2316
> mailto:info@xxxxxxxxxxxxxxxxx
> "WE REPAIR WITH CARE"
>
> SERVICE CENTERS PLEASE READ!!
> 1. Are you currently backed up or over-loaded?
> 2. Are you short a tech or have one on vacation?
> 3. Do you need help with a very difficult repair?
> 4. Would you like to make money jobbing the work out?
> 5. Would you like to ship out less profitable products so you can repair
> others?
> If you answered Yes to any of the above questions, Checkout these
websites:
> http://www.electricmedic.com/salesa.htm
> or
> http://www.electricmedic.com/shipping.htm
>
> Factory Trained Authorized Service Center For: APEX, Fisher, GE, KEC/KTV,
> Konka, Mitsubishi, Panasonic, Philips Magnavox, Pioneer, ProSCAN, RCA,
> Samsung, Sanyo, Sharp, SONY, Technics, Toshiba, Zenith
>
> Provide Extended care for: AON, Circuit City, GE Contracts, Glass Agency,
> Philips Contracts, NEW, Rex
>
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Larry E.
> Sent: Thursday, December 19, 2002 2:11 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: 220v
>
>
>
> Tommy, their talking about European tv sets not North American
> Larry Eastman
> American TV & Electronics
> Crystal River, Fl. 34428
>
> Hermantvr@xxxxxxxxxxxxx wrote:
>
> > Guys...I really don't know what you mean when you talk abut a TV using
> 220v.
> > On a 120v line you have a hot side and a neutral (0 volts) side. On a
240
> > line you have two hot sides.....believe me it will let the smoke out of
> yur
> > power supply filters.
> >
> > Tommy Herman
> > Herman TV
> > 250 School Ave SW
> > Taylorsville N.C. 28681
> > 828-632-5322 Voice
> > 828-632-3880 Fax
> >
> > If a TV requires 120 Watts of power, you could power it with 120V, 1 Amp
> > or 240V, 0.5A.
> >
> >
> > Gary McCartney
> >
> > McCartney Electronics
> > 7134 Fife Rd, RR 7
> > Guelph Ontario Canada N1H 6J4
> > Fax: (519)821-1530
> > email: gary (at) number63.ca
> >
> >
> >
> >
> > gulftech@xxxxxxxx wrote:
> >
> >>Dear Villy,
> >>
> >>Most of us know that formula as P = IE. Since current is directly
> >>proportional to voltage ( I = E/R), an increase in voltage yields a
> >>corresponding increase in current with R held constant. If current and
> >>voltage are both doubled, power is increased by a factor of 4.
> >>
> >>If I'm wrong, please set me straight.
> >>
> >>Regards,
> >>
> >>Ken Smith
> >>Gulf Technical Services
> >>3034 Gulf Breeze Parkway
> >>Gulf Breeze, FL 32563
> >>850-934-8324 (Voice) 850-932-0819 (Fax)
> >>
> >>On Thu, 19 Dec 2002 11:03:37 0000 "Vilhelm Boor" <villyboor@xxxxxxxxx>
> >>writes:
> >>
> >>>Villy boor
> >>> Boorelec Durban
> >>> When I read some of this I am rather surprised, where were some of
> >>>you trained, what happened to Ohms law? Why 2 round prongs. Most
> >>>countries use various combinations of flat pin at various angles,
> >>>Round pins tended to have a bakelite body.
> >>> But please remember W=IV so the greater V is the less I will be so
> >>>cables are lighter, plugs can be smaller and fuses lower I. Philips
> >>>for example make a wide range of TV with an input requirement of
> >>>from 90V to 270V, just plug it in and its working. I am sometimes
> >>>left speechless, this is your subject and livlihood, you must know
> >>>basics.
> >>>On Wed, 18 Dec 2002 19:43:29
> >>> teltek2 wrote:
> >>>
> >>>>No...Their 220 does not requite a huge plug like your dryer..just 2
> >>>>
> >>>round
> >>>
> >
> > Tommy Herman
> > Herman TV
> > 250 School Ave SW
> > Taylorsville N.C. 28681
> > 828-632-5322 Voice
> > 828-632-3880 Fax
> > hermantvr@xxxxxxxxxxxxx
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
> >
>
>
> --
> Larry Eastman
> American TV & Electronics
> Crystal River, Fl.
> http://www.tvjunkyard.com
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
