[TechAssist] Re: 220v
- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 20 Dec 2002 14:33:32 -0500
Thats what they said when Microsoft was selling for under $2. Now there
are very rich people that bought it at that price. It split many times
and 100 shares then could be 6000 now plus the price is a whole lot higher.
Phillip R Hull
phil245@xxxxxxxxxxxxx
----- Original Message -----
From: "Edward Gaidies" <teltek2@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, December 20, 2002 1:28 PM
Subject: [TechAssist] Re: 220v
>
> I'd like to Phil...but too risky for todays economy. If I did....I'd be
> sleeping with Martha Stewart. These things sometimes don't pan out. Let
the
> government take the initative. The have money for other things, why not
> better modes of power.
>
> -Ed-
> ----- Original Message -----
> From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, December 20, 2002 12:11 PM
> Subject: [TechAssist] Re: 220v
>
>
> >
> > It takes money and the first units will be very expensive, and as
fossil
> > fuel increases in price the fuel cells/hydrogen Etc. will seem cheap. I
> > have already bought stock in some of these Co. I'm want to hit a new
> > microsoft type Co. and make a ton. you should check out some of
these
> > Co. PRTN, HYGS, MKTY are just a few of them. They are mostly on the
> auto
> > fuel cell/hydrogen research side right now. You will probably have to
> wait
> > a long time to reap any rewards that may or may not come.
> > Phillip R Hull
> > phil245@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Edward Gaidies" <teltek2@xxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Friday, December 20, 2002 11:40 AM
> > Subject: [TechAssist] Re: 220v
> >
> >
> > >
> > > 2020 eh? I can't wait.
> > > Technology is there now...why 2020.
> > > Do we have to fight a few more "Oil Wars", till we wisen up. Or do we
> wait
> > > till NASA de-classifies them? ;-)
> > >
> > > -Ed-
> > > ----- Original Message -----
> > > From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Friday, December 20, 2002 10:57 AM
> > > Subject: [TechAssist] Re: 220v
> > >
> > >
> > > >
> > > > The US system may be better in the future, after 2020 we will
start
> > > > installing our own fuel cell system for our homes, and the wires and
> > poles
> > > > will be long forgotten.
> > > > Phillip R Hull
> > > > phil245@xxxxxxxxxxxxx
> > > > ----- Original Message -----
> > > > From: "Vilhelm Boor" <villyboor@xxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>; <techassist@xxxxxxxxxxxxx>
> > > > Sent: Friday, December 20, 2002 7:59 AM
> > > > Subject: [TechAssist] Re: 220v
> > > >
> > > >
> > > > >
> > > > > Villy Boor
> > > > > Boorelec Durban
> > > > > I am shocked that I know more about your power supplies in
North
> > > > America than seemingly you its residents do. North America works on
> 110V
> > > and
> > > > you are stuck with that, tough its not as safe and losses are
greater.
> > Now
> > > > you have a situation where you wish more voltage, you have to cheat
> The
> > > > mains supply is 3 phase, it is usual to run a line down a street and
> try
> > > to
> > > > balance the power by having house 1 on phase 1 house 2 on phase 2
etc.
> > To
> > > > get 220V you have to cheat, you use 2 phases so a plug has 2 live's.
> But
> > > why
> > > > in the name of Freddy would we have to do that. Options on the back
of
> > TVs
> > > > have gone, that requires you have a mains transformer, costs money
is
> a
> > no
> > > > no. American TV is only viewable in America and a few other
countries,
> > the
> > > > rest of us use the PAL system a much later and superior system, it
> > follows
> > > > then there is no requirement for your sets to work here or X. No we
> have
> > > > standard 3 pin plugs (flat Pins pointing at 10 and 2 with an unused
> > earth
> > > at
> > > > 6) nominal fuse volta
> > > > > ge
> > > > > is 4A and there is no mystery
> > > > > --
> > > > >
> > > > > On Thu, 19 Dec 2002 21:54:26
> > > > > Julian Panizo wrote:
> > > > > >
> > > > > >In the countries with 220-240 V many sets have the 110 V option
via
> > > > switch
> > > > > >and a few have the voltage change automatic. The household wiring
> is
> > > two
> > > > (2)
> > > > > >conductors, normally one hot and the other neutral, derived from
a
> > > street
> > > > > >trifasic supply. In a few countries you get in some places 220
and
> > > others
> > > > > >110.
> > > > > >Julian
> > > > > >
> > > > > >Julian Panizo
> > > > > >C.C. 1867 Asunción Paraguay
> > > > > >Phone/Fax 595 21 601913
> > > > > >panizo@xxxxxxxxxxxxxxx
> > > > > >----- Original Message -----
> > > > > >From: "Electric Medic" <info@xxxxxxxxxxxxxxxxx>
> > > > > >To: <techassist@xxxxxxxxxxxxx>
> > > > > >Sent: Thursday, December 19, 2002 8:41 PM
> > > > > >Subject: [TechAssist] Re: 220v
> > > > > >
> > > > > >
> > > > > >>
> > > > > >> We STILL have not answered the QUESTION. Does this guys set
work
> on
> > > > > >> 220volts. He said the set worked on 110v but not properly on
> 220v.
> > I
> > > > can
> > > > > >not
> > > > > >> believe that the set was designed to work on 220v using the
same
> > > power
> > > > > >cord
> > > > > >> that came with the set. Every 220v circuit I have seen here in
> the
> > > > states
> > > > > >> has a different cord (larger plug) with two hots. Is this some
> > > special
> > > > > >> CTC187AD. I think this is important enough to answer. We all
know
> > > that
> > > > 220
> > > > > >> has to hots and a neutral, and 110 has one hot and a neutral. I
> am
> > > > > >> interested how in the world he is plugging a CTC187 into a 220v
> > > outlet.
> > > > > >> Please someone, or the owner of the set EXPLAIN. Everyone that
I
> > have
> > > > seen
> > > > > >> will smoke if you apply 220v. This is driving me crazy. Why
would
> > > > anyone
> > > > > >> want to run his set on both 110v and 220v anyway? It seems to
me
> if
> > > it
> > > > > >> worked on 110v, that should be good enough. Very confused here
in
> > > > Georgia.
> > > > > >>
> > > > > >> Perry Bower
> > > > > >> Electric Medic
> > > > > >> "It's Cheaper to Keep Her"
> > > > > >> http://www.electricmedic.com
> > > > > >> Check out the Electronic Repair Screensaver We created. More
> Images
> > > to
> > > > > >come!
> > > > > >> To download these Collections you must first install the
Eyetide
> > > > Viewer:
> > > > > >>
> > > > >
> > > >
> > >
> >
>
>http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVG
> > > > C
> > > > > >> "We're Number One Where it Really Counts, With our Customers"
> > > > > >> 3850 Washington Road Suite 5b
> > > > > >> Martinez, Georgia 30907
> > > > > >> Phone: 706-8MEDIC4 (863-3424)
> > > > > >> Phone: 706-863-3474
> > > > > >> Fax: 706-863-2316
> > > > > >> mailto:info@xxxxxxxxxxxxxxxxx
> > > > > >> "WE REPAIR WITH CARE"
> > > > > >>
> > > > > >> SERVICE CENTERS PLEASE READ!!
> > > > > >> 1. Are you currently backed up or over-loaded?
> > > > > >> 2. Are you short a tech or have one on vacation?
> > > > > >> 3. Do you need help with a very difficult repair?
> > > > > >> 4. Would you like to make money jobbing the work out?
> > > > > >> 5. Would you like to ship out less profitable products so you
can
> > > > repair
> > > > > >> others?
> > > > > >> If you answered Yes to any of the above questions, Checkout
these
> > > > > >websites:
> > > > > >> http://www.electricmedic.com/salesa.htm
> > > > > >> or
> > > > > >> http://www.electricmedic.com/shipping.htm
> > > > > >>
> > > > > >> Factory Trained Authorized Service Center For: APEX, Fisher,
GE,
> > > > KEC/KTV,
> > > > > >> Konka, Mitsubishi, Panasonic, Philips Magnavox, Pioneer,
ProSCAN,
> > > RCA,
> > > > > >> Samsung, Sanyo, Sharp, SONY, Technics, Toshiba, Zenith
> > > > > >>
> > > > > >> Provide Extended care for: AON, Circuit City, GE Contracts,
Glass
> > > > Agency,
> > > > > >> Philips Contracts, NEW, Rex
> > > > > >>
> > > > > >>
> > > > > >> -----Original Message-----
> > > > > >> From: techassist-bounce@xxxxxxxxxxxxx
> > > > > >> [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Larry E.
> > > > > >> Sent: Thursday, December 19, 2002 2:11 PM
> > > > > >> To: techassist@xxxxxxxxxxxxx
> > > > > >> Subject: [TechAssist] Re: 220v
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> Tommy, their talking about European tv sets not North American
> > > > > >> Larry Eastman
> > > > > >> American TV & Electronics
> > > > > >> Crystal River, Fl. 34428
> > > > > >>
> > > > > >> Hermantvr@xxxxxxxxxxxxx wrote:
> > > > > >>
> > > > > >> > Guys...I really don't know what you mean when you talk abut a
> TV
> > > > using
> > > > > >> 220v.
> > > > > >> > On a 120v line you have a hot side and a neutral (0 volts)
> side.
> > On
> > > a
> > > > > >240
> > > > > >> > line you have two hot sides.....believe me it will let the
> smoke
> > > out
> > > > of
> > > > > >> yur
> > > > > >> > power supply filters.
> > > > > >> >
> > > > > >> > Tommy Herman
> > > > > >> > Herman TV
> > > > > >> > 250 School Ave SW
> > > > > >> > Taylorsville N.C. 28681
> > > > > >> > 828-632-5322 Voice
> > > > > >> > 828-632-3880 Fax
> > > > > >> >
> > > > > >> > If a TV requires 120 Watts of power, you could power it with
> > 120V,
> > > 1
> > > > Amp
> > > > > >> > or 240V, 0.5A.
> > > > > >> >
> > > > > >> >
> > > > > >> > Gary McCartney
> > > > > >> >
> > > > > >> > McCartney Electronics
> > > > > >> > 7134 Fife Rd, RR 7
> > > > > >> > Guelph Ontario Canada N1H 6J4
> > > > > >> > Fax: (519)821-1530
> > > > > >> > email: gary (at) number63.ca
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > gulftech@xxxxxxxx wrote:
> > > > > >> >
> > > > > >> >>Dear Villy,
> > > > > >> >>
> > > > > >> >>Most of us know that formula as P = IE. Since current is
> > directly
> > > > > >> >>proportional to voltage ( I = E/R), an increase in voltage
> yields
> > a
> > > > > >> >>corresponding increase in current with R held constant. If
> > current
> > > > and
> > > > > >> >>voltage are both doubled, power is increased by a factor of
4.
> > > > > >> >>
> > > > > >> >>If I'm wrong, please set me straight.
> > > > > >> >>
> > > > > >> >>Regards,
> > > > > >> >>
> > > > > >> >>Ken Smith
> > > > > >> >>Gulf Technical Services
> > > > > >> >>3034 Gulf Breeze Parkway
> > > > > >> >>Gulf Breeze, FL 32563
> > > > > >> >>850-934-8324 (Voice) 850-932-0819 (Fax)
> > > > > >> >>
> > > > > >> >>On Thu, 19 Dec 2002 11:03:37 0000 "Vilhelm Boor"
> > > > <villyboor@xxxxxxxxx>
> > > > > >> >>writes:
> > > > > >> >>
> > > > > >> >>>Villy boor
> > > > > >> >>> Boorelec Durban
> > > > > >> >>> When I read some of this I am rather surprised, where were
> some
> > > of
> > > > > >> >>>you trained, what happened to Ohms law? Why 2 round prongs.
> Most
> > > > > >> >>>countries use various combinations of flat pin at various
> > angles,
> > > > > >> >>>Round pins tended to have a bakelite body.
> > > > > >> >>> But please remember W=IV so the greater V is the less I
will
> > be
> > > so
> > > > > >> >>>cables are lighter, plugs can be smaller and fuses lower I.
> > > Philips
> > > > > >> >>>for example make a wide range of TV with an input
requirement
> of
> > > > > >> >>>from 90V to 270V, just plug it in and its working. I am
> > sometimes
> > > > > >> >>>left speechless, this is your subject and livlihood, you
must
> > know
> > > > > >> >>>basics.
> > > > > >> >>>On Wed, 18 Dec 2002 19:43:29
> > > > > >> >>> teltek2 wrote:
> > > > > >> >>>
> > > > > >> >>>>No...Their 220 does not requite a huge plug like your
> > dryer..just
> > > 2
> > > > > >> >>>>
> > > > > >> >>>round
> > > > > >> >>>
> > > > > >> >
> > > > > >> > Tommy Herman
> > > > > >> > Herman TV
> > > > > >> > 250 School Ave SW
> > > > > >> > Taylorsville N.C. 28681
> > > > > >> > 828-632-5322 Voice
> > > > > >> > 828-632-3880 Fax
> > > > > >> > hermantvr@xxxxxxxxxxxxx
> > > > > >> > ------------------------------------------
> > > > > >> > Submit A Repair Tip For Everyone Here:
> > > > > >> > http://www.tech-assist.org/secure/tip/main.html
> > > > > >> > ------------------------------------------
> > > > > >> > To REMOVE your email address, click here:
> > > > > >> > http://www.tech-assist.org/unsubb.html
> > > > > >> > To CHANGE your email address, click here:
> > > > > >> > http://www.techassist.net/forms/change.html
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> Larry Eastman
> > > > > >> American TV & Electronics
> > > > > >> Crystal River, Fl.
> > > > > >> http://www.tvjunkyard.com
> > > > > >>
> > > > > >> ------------------------------------------
> > > > > >> Submit A Repair Tip For Everyone Here:
> > > > > >> http://www.tech-assist.org/secure/tip/main.html
> > > > > >> ------------------------------------------
> > > > > >> To REMOVE your email address, click here:
> > > > > >> http://www.tech-assist.org/unsubb.html
> > > > > >> To CHANGE your email address, click here:
> > > > > >> http://www.techassist.net/forms/change.html
> > > > > >>
> > > > > >> ------------------------------------------
> > > > > >> Submit A Repair Tip For Everyone Here:
> > > > > >> http://www.tech-assist.org/secure/tip/main.html
> > > > > >> ------------------------------------------
> > > > > >> To REMOVE your email address, click here:
> > > > > >> http://www.tech-assist.org/unsubb.html
> > > > > >> To CHANGE your email address, click here:
> > > > > >> http://www.techassist.net/forms/change.html
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >------------------------------------------
> > > > > >Submit A Repair Tip For Everyone Here:
> > > > > >http://www.tech-assist.org/secure/tip/main.html
> > > > > >------------------------------------------
> > > > > >To REMOVE your email address, click here:
> > > > > > http://www.tech-assist.org/unsubb.html
> > > > > >To CHANGE your email address, click here:
> > > > > > http://www.techassist.net/forms/change.html
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > _____________________________________________________________
> > > > > Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for
$19.95/year.
> > > > >
http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus
> > > > > ------------------------------------------
> > > > > Submit A Repair Tip For Everyone Here:
> > > > > http://www.tech-assist.org/secure/tip/main.html
> > > > > ------------------------------------------
> > > > > To REMOVE your email address, click here:
> > > > > http://www.tech-assist.org/unsubb.html
> > > > > To CHANGE your email address, click here:
> > > > > http://www.techassist.net/forms/change.html
> > > > >
> > > > >
> > > > >
> > > >
> > > > ------------------------------------------
> > > > Submit A Repair Tip For Everyone Here:
> > > > http://www.tech-assist.org/secure/tip/main.html
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.techassist.net/forms/change.html
> > > >
> > > >
> > >
> > > ------------------------------------------
> > > Submit A Repair Tip For Everyone Here:
> > > http://www.tech-assist.org/secure/tip/main.html
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.techassist.net/forms/change.html
> > >
> > >
> > >
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
