[amayausers] Re: New Member Here
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 8 Aug 2007 18:03:16 UT
This message was posted by westvalley on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/7/29.html#000004
Here are the pics as promised.
http://www.dragdepot.com/images/oregon.jpg
http://www.dragdepot.com/images/look.jpg
http://www.dragdepot.com/images/test.jpg
The lettering is standard Melco alphabets (Roman Script & Zapf Chancery). Sewn
on satin with medium weight backing and both of the following examples were
sewn out at about 900spm. Lettering is 1.5" tall and at 80% width.
The bottom of the "g" in Oregon is sewn bottom up, then it goes to the top and
sews top down. The columns aren't matching up. The same thing happens with the
"k" in Look.
Ran the test design (all one thread color, sorry) and the diamond, which I
believe is supposed to basically stitch on top of itself, is off on two of the
sides.
Where do I begin to solve this problem?
Scott
414-276-2848
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
