[pure-silver] Re: (slightly OT) Bronica RF 645 and flash
- From: "Breukel, C. (HKG)" <C.Breukel@xxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Tue, 22 Nov 2005 15:12:13 +0100
Hi Nick,
>
> I'm assuming you mean either a Metz 60 or a 45?
..you're right, its a 60CT..
I'll check the Metz web site (http://www.metz.de/ ), it's currently off line
though. I did use the Metz 60 CT (when I was not aware of this voltage
issue)with a Minolta X300 as well as with a Bronica SQA, no problems, so maybe
I am overly worried..
Thanks,
Best,
Cor
Go to
> the Metz website they
> have a list of safe serial numbers. Older ones put out high
> voltage. If it
> turns out your flash is a high voltage model you've got
> choices. Something
> like Wein flash sync. It's something like that. Or Metz used
> to upgrade
> flashes if you sent them in. I don't know what they charge or
> if they still
> do it but if you check with Metz support they can help you.
>
> Nick
> ==============================================================
> ===============================================
> To unsubscribe from this list, go to www.freelists.org and
> logon to your account (the same e-mail address and password
> you set-up when you subscribed,) and unsubscribe from there.
>
============================================================================================================To
unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.
Other related posts:
