> > > It should be noted that one of the complications of the RF 645's > vertical orientation is that most flashes, which presume horizontal > orientation, need to be set to a very wide mode to get enough > coverage; > this was the official reason for the existence of the RF20, > as I recall. > > Graham Hi Graham, Good point, and I am aware of that, but I always use my Metz with this wide angle diffuser screen anyway, and have used it with my 6*6 SQ without problems. Got soem info from Intro2020 (UK represensitive) the 30volts output of a Metz 60CT 1/2 are no problem for the RF, best, Cor ============================================================================================================To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.