10.1 An examination under steam pressure shall be undertaken, a) before first placing the boiler into service, barter every hydraulic test, and c) at intervals (bold text on) not exceeding fourteen months. (bold text off) Seems clear to me. Nigel ----Original Message----- From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]On Behalf Of Clif Walker Sent: 14 January 2006 17:09 To: modeleng@xxxxxxxxxxxxx Subject: [modeleng] Re: New boiler test rules Hi All, Where did the boiler test every 14 months creep in? My boiler inspector having read the new rules told me that it was still two years. Regards Clif ----- Original Message ----- From: "Southern Federation Editor" <heisler9-sfededitor@xxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Saturday, January 14, 2006 1:14 AM Subject: [modeleng] Re: New boiler test rules > Hi all > As the representative of the Southern Federation on the Test Code > Committee > please allow me to correct a number of errors that have crept into this > topic > >> 10 Steam Test > > 10.1 An examination under steam pressure shall be undertaken, a) before > first placing the boiler into service, b) after every hydraulic test, and > c) > at intervals not exceeding fourteen months. > > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.