In message of 25 Feb, Roger Darlington <rogerarm@xxxxxxxxxx> wrote: > On 24 Feb 2008, charles wrote: > > In article <88e32c764f.rogerarm@xxxxxxxxxxxxxxxxxxx>, > > Roger Darlington <rogerarm@xxxxxxxxxx> wrote: > > > >> Hi David, > > > >> I have Iyonix, RO 5.13, Ov Pro 2.77, Printers 1.72. > > > >> I have an Ov Pro file, mae with OvPro 2.77, which it will not print, > >> giving an error 'Ov Pro has suffered an internal error, type=3'. > > > >> It does this if I try printing to PoScript, or my Canon Inkjet, so I > >> don't think it is printer-driver related. > > > >> Strangely enough, OvPro will print all the other files I have fed it. > > > >> I have tried saving it out as a DDL file and re-loading it back into > >> OvPro (after a re-boot) but it's always the same with this particular > >> file: type=3 error. > > > >> Any ideas? > > > > > > have you a very large picture in it? If so try proxying it. > > > Apart from having no pictures at all, Another thing is that the error > message varies between type=3 and type=5 depending upon its' own whim. > > I have even reduced the 56 page homerton/selwyn font document to just > one line, and it still crashes with a type=3,or=5. > > Since it is now so small, I have attached it, but whether it gets > through, or not, is a different matter... Prints OK here both with PrintPDF and to a Postscript printer. No crash. Iyonix 5.13, OPro 2.77. -- Tim Powys-Lybbe tim@xxxxxxxxx For a miscellany of bygones: http://powys.org/ To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling