In message <4ebdc26142ajg@xxxxxxxxxxxxx> Alan Griffin <ajg@xxxxxxxxxxxxx> wrote: > On 03 Mar, Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: > >> Ok, check the following: > >> 1 - Check that the connection is set to USB if you are doing this on >> an Iyonix. Adding a new printer definition auto selects Parallel and >> you should use Ian Hamilton's !PrtSet2USB application. > > I'm using a RISC PC! > Alan OK, just tried it on a Kinetic enabled RISCPC using printers 1.72 , running Select3i4 aka Adjust, Gutenprint with GPDriver2 version 2.04, S800 driver from the new PrintersGP directory to a Canon i550. This prints out OK but only a single page as there is another issue at the moment. Make sure you have used the new supplied printer definition files and use PrintersGP ones if running Castle's printers application or PrintersG is running RISCOS Ltd's one. Also check !GPSetup to see if the media is set as automatic feed. Doug -- Using a Iyonix PC and RISC OS 5.13, the thinking persons alternative operating system to Microsoft Windows.