[riscos-printing] Re: GutenPrint and Canon printers
- From: Alan Griffin <ajg@xxxxxxxxxxxxx>
- To: riscos-printing@xxxxxxxxxxxxx
- Date: Sun, 04 Mar 2007 00:25:30 +0000 (GMT)
On 03 Mar, Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote:
> > I'm using a RISC PC!
> > Alan
> OK, just tried it on a Kinetic enabled RISCPC using printers 1.72 ,
> running Select3i4 aka Adjust, Gutenprint with GPDriver2 version 2.04,
> S800 driver from the new PrintersGP directory to a Canon i550.
I'm using OS 4.02 Printers 1.64a GPDriver2 version 2.04
S800 driver from the new PrintersG directory to a Canon i560
> This prints out OK but only a single page as there is another issue at
> the moment.
> Make sure you have used the new supplied printer definition files and
> use PrintersGP ones if running Castle's printers application or
> PrintersG is running RISCOS Ltd's one.
Yes I'm using the new PrintersG definition files.
> Also check !GPSetup to see if the media is set as automatic feed.
Yes it's set to automatic.
Alan
Other related posts:
