[pure-silver] Re: Packard shutters?
- From: Nick Zentena <zentena@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Wed, 16 Feb 2005 13:47:46 -0500
On Wednesday 16 February 2005 12:46, Gene Johnson wrote:
> with the pin in, the shutter should open AND close. Squeeze harder. Make
> sure the pin is in right. It's good if the pin is a nice close fit in the
> hole. Finish nails come in different sizes and one of the middle sizes is
> right around perfect. I file the point sort of round, and even sometimes
> nake a blob of JB weld as sort of a knob.
Okay I'm confused. It seems to work okay if I leave my thumb off the
hole. Is
that the right way then?
The piston doesn't seem to return all the way some times. Do they need
some
sort of lube? It's okay most of the time in instant mode but with the bulb
mode some times it hangs up partially open.
Thanks
Nick
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
