[pure-silver] Re: Packard shutters?
- From: Nick Zentena <zentena@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 17 Feb 2005 07:56:22 -0500
On Wednesday 16 February 2005 17:55, Richard Knoppow wrote:
>
> Synch type Packards have two solder contacts at the top.
> Both are fixed in place. If one is loose something has
> broken. It may be easy to fix. I have seen Packard shutters
> mounted with external flash contacts, usually a microswitch
> with a spring metal strip extending to the top of the
> piston. The contacts in factory synch Packards are internal.
> I think you may have to open up the shutter to see if
> there is some broken part inside perhaps jamming it.
I wonder if the broken flash sync was why the camera was taken out of
service. Well the shutter was a bonus so I can't complain-)
Nick
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
